Fikse Profil 13 | 18x10 & 18x11 [SOLD]
#1
Fikse Profil 13 | 18x10 & 18x11 [SOLD]
Category: Accessories
Price: $3000
Part Fits: Corvette
Location (State): NY
Item Condition: Brand New
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6, LT1/LT4, Small Block, Big Block
LS Engine?: Fits LS Engine
I doubt these wheels need much of an introduction or explanation. These are what everyone wants: light, strong, 3-piece forged wheels. I have turned my attention to my MKIV Supra, and it looks less and less like I will use these are I once thought I would.
These wheels are tough to find and don't surface very often. These were built for a C6 base (narrowbody) Corvette. I have added some high-quality pictures so that you know exactly what you are purchasing. These wheels are structurally in excellent condition.
I've owned many wheels, and these are by far the cleanest set I have had. While they are used, they are in immaculate condition: no marks on any of the hardware (still have factory orange markings on bolts), the faces are perfect, the lug nut holes are in fantastic condition (great care taken when mounting them. I have searched to find issues and there is one blemish on the outer hoop that is very small.
For all intents and purposes, these wheels are [basically] new.
The wheels do have a set of Pilot Sport Cup tires mounted and will be included with the purchase. They are old. They are hard. They should not be used.
I'm happy to ship them so long as you can wait a week or two since I work an exorbitant amount of hours.
2x 18x10 +57 | Front
F730A602010730526
F730A602010730527
2x 18x11 +79 | Rear
F730A602010730525
F730A602010730528
4x Fikse Center Caps
Full Disclosure: these wheels will not fit a 4th gen or C5 properly. The offset on the rear wheels is just not aggressive enough; they do not sit out far enough. That said, I can re-hoop the rear wheels if the right buyer comes along to get them to fit.
Last edited by Spd-Kilz; 12-04-2017 at 08:46 PM.
Trending Topics
#8
Maybe you didn't get my last PM. It's no real challenge to add some width to the rear wheels. We could either add it on the inner hoop, or on the outer lip to lower the offset depending on what your car needs.
I'm happy to re-hoop them for you if you need.
Best,
Adam
I'm happy to re-hoop them for you if you need.
Best,
Adam