New Stainless Works LS Turbo Headers
#1
New Stainless Works LS Turbo Headers
Category: Engine - Exhaust
Price: $900
Location (State): OR
Item Condition: Brand New
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine
3" stainless locking flanges welded with back purge.
With the flanges, wrap, and welding, I'm in these over $1200
Shipped to your door and covering papal fees $900
Feel free to shoot me a text or call, five zero three - 705-589one
Thanks
#3
Here is the info from the site.
LS1 through LSX Up and Forward Turbo Headers. They can also be used as Down and Forward. Header flanges are made with 3/8" thick 304 SS and tubing is .065 wall 304 SS with 1-7/8" Primaries and 3" Slip Fit Collectors. Headers are fully tig welded and back purged.
SKU: LSXT
$1,205.00
LS1 through LSX Up and Forward Turbo Headers. They can also be used as Down and Forward. Header flanges are made with 3/8" thick 304 SS and tubing is .065 wall 304 SS with 1-7/8" Primaries and 3" Slip Fit Collectors. Headers are fully tig welded and back purged.
SKU: LSXT
$1,205.00
Trending Topics
#10
WFO, sorry about your earlier PM, I was debating at the time about modifying them, but am not going that route.
Sorry Spectre, I didn't check the thread after bumping them up, I was waiting to get flagged via PM. I don't know if they will clear a 4th gen, it doesn't specify on the SW site. It only talks about up and forward. SKU is LSXT
Thanks
Sorry Spectre, I didn't check the thread after bumping them up, I was waiting to get flagged via PM. I don't know if they will clear a 4th gen, it doesn't specify on the SW site. It only talks about up and forward. SKU is LSXT
Thanks