FS - F1C Procharger Kit, SDCE, huge intercooler- PRICE DROP! - Chicago

Reply Subscribe

Thread Tools

Search this Thread

03-10-2010, 04:26 PM

Jimmy P

TECH Fanatic

Thread Starter

iTrader: (177)

Join Date: Jan 2004

Location: USA

Posts: 1,933

Likes: 0

Received 1 Like on 1 Post

FS - F1C Procharger Kit, SDCE, huge intercooler- PRICE DROP! - Chicago

Category: Engine - Power Adders
Price: $5500
Part Fits: 93-02 Chevrolet Camaro
Location (State): IL
Item Condition: Used
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Non-LS Part

SOLD
Price has been dropped to $5500! Cost me half that just to have the blower rebuilt..First one with the $$ gets it.

F1C head unit was returned to me from Procharger on March 22 2010. it was rebuilt using all new parts in it except for the outer casing. It is basically a brand new blower. Nothing on it is used except for the outer casing. It broke on me first trip at the track, with less than 500 miles. Normally these things last for a real long time, but I guess I had a factory dud. No worrys though, Procharger took care of me, with receipts to prove it has just went through. I can even give the serial number to anyone who is interested and they can call Procharger and ask about the history of the blower. I was using this blower for a custom kit. Used SDCE's belt tensioner system without any belt slip. Got a max of 18.5psi of boost on a 402, enough to make 802rwhp and 900+ torque on a Mustang dyno.
The kit uses a large front mount intercooler using a real core, not a Ebay brand core. It is very efficiant. All the piping is 4", and it comes with a Vortech Mondo bypass valve. I had them mount right after the blower, and before the intercooler, so that way the air gets bypassed as soon as possible and doesn't heat soak the intercooler. As a side note, placing the bypass valve here makes it REAL loud, so just pointing that out as it will make the car a real head turner.(not sure if you like that type of thing or not, I did)
I will include all t-bolt clamps, real silicone couplers, and mark where they go. Intercooler has less than 500 miles of use.
The SDCE tensioner comes with a brand new tensioner. The previous one was starting to feel a little weak, so I replaced it with a new one. It feels rock solid. The J bracket is the original Procharger Aluminum one.

Looking to get $6000 plus shipping for this. I will consider reasonable offers but please no low ballers.There is a lot of money and time in this kit, and it will be a brand new head unit. Quite a bargain if you consider if you were to price it out from some the retailers on here that use their " ebay front mount intercooler kits" it would come out to over $7400 and that wouldn't include the SDCE tensioner.
Please feel free to ask any questions. about the Item.
Edit: Forgot to mention it also comes with the 4" tight bend aluminum pipe that was made for me to fit in the cramped space behind the radiator. It goes from the blower inlet, to the bumper and uses the very large air filter seen the pictures below.