Forged Sleeved LS7
#1
Launching!
Thread Starter
iTrader: (8)
Join Date: Oct 2007
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
Forged Sleeved LS7
Category: Engine - Complete Motors
Price: $12500
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V, 67-92 Chevrolet Camaro, 67-92 Pontiac Firebird
Location (State): MN
Item Condition: Brand New
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9
LS Engine?: Fits LS Engine
Block: Darton Sleeved LS2 (Race Engine Development did the sleeves)
Crank: Callies Dragonslayer.
Main Caps: Dowel pinned and ARP studded
Rods: Manley 6.125 Pro-Billet Steel
Pistons: Diamond Boost duty thermal & friction coated 10:1
Heads: ETP LS7 (now Mast motorsports)
Valves:Manley Custom Titanium intake valves/Custom SS exhaust valves
Valve covers GM performance parts
Cam: Comp Custom 228/232 .620"/.612" 116+4 (room to go larger)
Bearings:Mahle/Clevite Coated Main Bearings/Rod Bearings Durabond Coated Cam Bearings
Studs: ARP L19 (strongest material available)
Rockers: Jesel Mohawk Adjustable shaft 1.7/1.7 ratio
Valve Springs: Manley 1.550" double springs #22430 210 lbs seat pressure/525 lbs open pressure. .700 lift
Retainers : Manley Titanium
Lifters: Comp short travel hydraulic tie bar.
Timing chain: Manley Double roller Timing Chain
Head Gasket: Cometic MLS .060"
Balancer: ATI F-body SFI
Oil Pan: Moroso Aluminum
Oil pump: Melling High Volume Oil Pump
Fast 102 Intake Manifold
The engine was assembled by Futral Motorsports
I'm sure i'm leaving a few things out.
I would consider taking another aluminum LS engine as partial trade.
Or maybe C3 suspension upgrades
or C6 Z06 suspension upgrades.
Compare to this engine (my engine is stronger and built with better parts)
https://www.mastmotorsports.com/coll...e-engine-650hp
Last edited by Professor_speed; 06-29-2017 at 09:03 AM. Reason: Updated parts list
#6