Superman09

iTrader: (65)

Category: Engine - Power Adders
Price: $1
Location (State): MI
Item Condition: Brand New
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine

Doing some spring cleaning and have the following parts that need to go!
We are not going to modify any of these parts, all sold as-is.

1.) First version V2 T6 S400 based Hot-side. Will use a T6 S400 turbo w/ V1 Race Cover Includes: V2 Stainless .120 wall manifolds, crossover (threaded flange, recommend drilling these out), Turbo Support Bracket/Drain, 5" to 4" 2-piece downpipe (tip may have minor imperfections) V-band clamps for crossover and downpipe tip included. No Nuts/bolts included. Sold As-is.
SOLD




2.) V2 Twin T4 Top-Mount Hot-side. Includes: V2 Stainless .120 wall manifolds, .Stainless .120 wall Up-pipes with T4 flanges and 44mm WG flanges and O2 bungs. 2-peice passenger side 3" Downpipe, 2-piece drivers side 3" downpipe. V-band clamps for manifolds and downpipes included. No Nuts/bolts included. Sold As-is.
$1249 + $50 ship *2 available*




3.) GT47-55 Flanged Full 5" downpipe. Front bumper exit style. Wideband O2 bung welded in w/plug included. .065 wall Stainless Steel. Sold As-is.
$295 + $25 ship *2 available*






4.) S400 Flanged 5" to 4" 2-piece downpipe. Front bumper exit style. Wideband O2 bung welded in w/plug included. V-band Clamp for tip included .065 wall Stainless Steel. Tip may have minor imperfections. Sold As-is.
$275 + $25 ship *3 available*




5.) Intercooler Bracket for Twin Turbo Intercooler 93-02 F-body. Bracket only, no Nuts/bolts included. Very thick Stainless Steel
$75 + $10 ship *4 available*







6.) V2 .120 wall Stainless V-banded manifolds *retain OEM alternator location on 98-02 f-bodies. Same manifolds used in our V2 kits. No clamps, nuts, bolts included. Sold As-is.
$475 + $25 ship *2 available*




7.) V1 A/C Retaining T4 Kit. 98-02 f-body. Includes C6 manifold for the passenger side (wrapped), Un-used Passenger side hot pipe (wrapped), Un-used Crossover with 44-46mm WG and T4 Flange (wrapped), Un-used 3" downpipe, Un-used Aluminum J-pipe for the cold side that was dipped carbon fiber, NEW stainless remaining cold-side pipes, t-bolt clamps, silicone couplers, and Intercooler Brackets. Sold As-is, you will receive exactly what is pictured.
$995 + $50 ship *1 available*






PM to purchase any of the above. Any questions please feel free to ask, thanks!!


Jon

bstrang6

Your Ac kit requires a tube k member correct? What driver side manifold does it require?

bstrang6

Also if not running a down pipe back through the k member could this be used with a factory k? I'm going bumper exit

Superman09

iTrader: (65)

The v1 ac requires turbo kmember, even if bumper exit as you need the k member space to fit hot side piping around the ac compressor . Passenger side truck manifold needed to run flipped forward on the drivers side of this setup

Superman09

iTrader: (65)

Bump! Pending sale on the T6 hot-side

383camaroz28

iTrader: (22)

Any derale fans hanging around lol

Superman09

iTrader: (65)

No sir, sorry

Superman09

iTrader: (65)

Bump!

V1 AC Kit: $995 !!!

ramairroughneck

iTrader: (35)

Payment sent for one of those twin hotsides.

Superman09

iTrader: (65)

Received, will ship TODAY!

Mgill

iTrader: (4)

What exactly is needed to install this kmember wise. I have a brm tubular but it isn't for turbo...

Superman09

iTrader: (65)

You need the turbo version K-member. KM013

one fast zo6

iTrader: (490)

I will take the V1 A/C Retaining T4 Kit for the 98-02 f-body. PM sent

Superman09

iTrader: (65)

Still have a lot of this stuff, including the V1 AC Kit!

Superman09

iTrader: (65)

Back up, have another old version T6 hotside available (first in the original post)

Superman09

iTrader: (65)

BuMp!

necrocannibal

iTrader: (5)

Can I use the T6 hotside with my current V1 a/c cold side?

Superman09

iTrader: (65)

No sir, turbo sits in a completely different location, sorry!

necrocannibal

iTrader: (5)

Darn. Ok so much for just the hot and cold side together? I think I can use my current BOV and 2 waste gates I'm using on your V1 a/c kit. Are the oil feed lines the same?

Superman09

iTrader: (65)

There is no old style cold side available at the moment. I might be able to piece something together soon but right now I just have a T6 hotside ready to go. Oil Lines are similar but again, turbo is in a different location so the oil lines run to a different location so may need some adjustments. Kit uses a pair of 44-46mm wastegates.