Id-2000 injectors
#1
Staging Lane
Thread Starter
iTrader: (11)
Join Date: Jun 2003
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
Id-2000 injectors
Category: Engine - Intake/Fuel
Price: $1700
Part Fits: 2010+ Camaro, 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette, 04-06 Pontiac GTO, 04+ Cadillac CTS-V, 67-92 Chevrolet Camaro, 67-92 Pontiac Firebird, Front wheel drive vehicles
Location (State): IN
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6, Small Block, Big Block
LS Engine?: Fits LS Engine
I WOULD LIKE TO MAKE A TRADE FOR SAME LIKE, KIND AND QUALITY 1700'S.
IF YOU HAVE SOME 17'S AND WOULD LIKE TO TRADE GIVE ME A TEXT AT 317-710-4887.
Thanks!
Last edited by Birddogg; 11-24-2017 at 08:59 AM. Reason: photograph added
#7
Staging Lane
Thread Starter
iTrader: (11)
Join Date: Jun 2003
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
Description of Injectors
Injector Dynamics 200LB ID2000 Fuel Injectors 2000.34.14.15.8
Basic Specifications
Nominal Flow Rate - 2225cc/min @ 3.00 Bar (43.5 psi) Using Gasoline at 52 Degrees C (125 Degrees F)
Maximum Differential Fuel Pressure - 9.0 Bar (130.5 psi)
Fuel Compatibility - Compatible with Methanol/Ethanol/All Known Hydrocarbon Fuels. Incompatible with MTBE/Nitro Methane/Nitro Propane.
Electrical Connector - Denso
Basic Specifications
Nominal Flow Rate - 2225cc/min @ 3.00 Bar (43.5 psi) Using Gasoline at 52 Degrees C (125 Degrees F)
Maximum Differential Fuel Pressure - 9.0 Bar (130.5 psi)
Fuel Compatibility - Compatible with Methanol/Ethanol/All Known Hydrocarbon Fuels. Incompatible with MTBE/Nitro Methane/Nitro Propane.
Electrical Connector - Denso
Trending Topics
#10
TECH Fanatic
iTrader: (9)
i have a set of these forsale
https://fuelinjectorconnection.com/c...series-1450-cc
just purchased 210s i ran out of fuel so upgraded. pm me if u r interested
https://fuelinjectorconnection.com/c...series-1450-cc
just purchased 210s i ran out of fuel so upgraded. pm me if u r interested
#16
Staging Lane
Join Date: Dec 2007
Location: Dirty south/houston, tx
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
I truley don't know why you are not running these. I have 225lb injectors on a e85 5.3 on 15psi h/c/I and it idles and drives crazy smooth. Will never need any more injector.. I'm even going to put some on my 408..