Category: Accessories
Price: $0
Part Fits: 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird
Location (State): DE
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine

I have ALL kinds of parts from a car i built years ago that a customer crashed and has had the parts sitting in his shed. All parts have around 1k miles on them.

RPM MN6 T56-LS1, Triple Cone Synchros, 9310 Viper Input & Output Shafts,
Steel Shift forks, All Parts Cryo Treated and Micro Polished. Retail is $3545 with a core
Selling for $2500 no core. I also have bell housing SOLD!!!

Mcleod Twin Disc (Original Version) I dont have the master cylinder with this but a tick master will work fine. 1500 new when they were out. Ill take $800 SOLD!!

Nasty Performance fuel system: Sheet metal tank with magnafuel 2000hp Street pump, All fuel lines, Mangafuel regulator ect. SOLD!!

Also have the Edelbrock Victor Jr. carb style intake with Nasty Performance sheet metal elbow and a 90MM TB $750

Moser 9 inch 35 spline axles spool 3.70 gear. Full Assembled ready to bolt in. $2400 SOLD!!

ET Performance 5.3 heads Fully poorted and assembled 2100 new Ill take $1300

Cylinder Head: LS1 Application: Street / Race
Port Volume: 230cc Chamber Volume: 64cc
Test Bore: 4.000" Test Pressure: 28.00" Water
Intake Valve: 2.055" Exhaust Valve: 1.570"

Valve Lift Intake Exhaust Valve Lift
.100" 82 58 .100"
.200" 162 115 .200"
.300" 210 154 .300"
.400" 265 187 .400"
.500" 297 209 .500"
.550" 310 214 .550"
.600" 320 222 .600"
.650" 329 227 .650"

Also have BMR extreme duty Tq arm and Ext anti roll bar SOLD

Adjustable BMR Lower Control arms and Panhard Bar Chromoly $275

Denny's Nitrous Ready Driveshaft for 6 speed 9 inch set up. 1350 yolk and 30 Spline trans yoke. $350 SOLD!!

monster tach, High amp alternator, stock alternator,

 

BMR extreme duty Tq arm and Ext anti roll bar this to 23453?

 

$675 shipped.

 

Pics to grifter757@yahoo.com and paypal info. Thanks.

 

Inbox me your number and i can text you some tomorrow. Fran@raceprovenmotorsports.net is my paypal. You will need a boxed subframe to work with the TA just FYI... i would stick with BMR also

 

any pics of the fuel system? thanks

 

I have some on my phone i can text

 

that T-56 standard f body gearing? or m12 gearing?

 

Standard

 

Keep the sales coming

 

pm'd you on the t56 and clutch

 

Bump..

 

still got the 9 inch?

 

Yes i do

 

Willing to take a part trade on the Trans? I have an 01 T56 w/ less than 20K on the clock.

 

Not at this time no. I dont need another trans for anything.

 

Bump..

 

Make some offers.

 

Still have the clutch? Have any more info on this (I'm new to the LS platform)? How much HP is this rated for and will it work with my LS2/T56 dropout from a GTO?

 

whats the best deal on the drive shaft