Sold Heads and pushrods 11-28


Located in NYC, 11370
I will ONLY drive to meet up with you somewhere within NYC or out on LI.


Single DIN radio adapter.
$10
$15 Shipped



Rear Z28 stainless emblem.
The bowtie isn't for sale, the Z28 is. I have an SS, so you can probably figure out why. The picture is terrible, its in pretty nice condition, the smudges are reflections. If you're interested, I'll snag another pic.
$20 Shipped



D. Side marker housing
In good condition
$10


Camaro side mirrors
Red, both have some minor scratches from storage. Passenger side is off a 2000 Z28, Driver is off a 2001 SS. They're identical though. Driver side had a problem with the up/down motor being intermittent.
$25 Driver Side
$40 Pass. Side
OR
$50 for Both




I have 8 rockers out of the same TBSS LS2 engine as the heads (no idea what happened to the others, I'm pretty sure I had them at some point)
$10


2 rocker pedestals also from the same engine
$10


Pushrods. No idea what brand they are. They're all 7.400 long, but as you can see, the other number isnt the same across all 16. I'm not sure if that's the wall thickness but maybe you just want em for a mockup or something. Idk.
SOLD


243 Heads with .650 Dual springs
I purchased these from a member on here a while back. They're supposedly off an LS2 TBSS, but have a 5.7 stamped in the head. They guy I bought em from did have a TBSS with aftermarket heads. When purchased, I was told there were 22k miles on the heads, and ~5k miles on the springs.
I never got around to using them, they've just been sitting.
The spring set is supposed to be this one, from TSP including the seats, springs, seals, and Ti retainers:
PRC .650 Double Spring Kit
Overall condition is good, but judge for yourself. They're a bit dirty and definitely need to be cleaned up some.
Will NOT separate springs from heads

SOLD

 

bumps

 

up for the AM

 

Bump. C'mon, somebody out there wants these.

 

bumpppp

 

wish you knew more about these lol... i woulda bought them when i got those rims

 

Just trying to be honest, I don't want to sell em then have the buyer find out they're not as described. As far as I can tell though, they're exactly as I listed. The springs and retainers look right as do the valve seals, not that that means too much. The mileage on the heads I did verify (saw the guy's truck with aftermarket heads and 22xxx miles on it), but the spring mileage I'm just going on what I was told.

Also I don't think you could've fit ANYTHING else in that car even if you wanted to lol. Maybe I can interest you to come back for em, I got something else (non-engine related) I gotta list up tomorrow too.

 

believe it or not i coulda sqouze them in some where trust me...

If i can find out what the effective compression will be with these i might come get them... pm that other thing if you think i might be interested

 

Those are not from a ls2....the 5.7 casting mark denotes they came from a 5.7l and that basically means with very few exceptions they are ls6 heads. Sodium valves.....Good luck with the sale, those are a great set of heads.

 

What does the 08 mean then? I thought that was the manufacture year stamped into the head. Its a bit hard to tell in the pics, but they're both (5.7 and 08) stamped on each head.

 

Back up with something new

 

ttt for Monday

 

Up! Gimme some offers!

 

Bump.

 

friday bump

 

up. price drop on the heads.

 

monday bump

 

Bumping with an update

 

up...

 

bumpin