Category: Racing Parts
Price: $0
Part Fits: 93-02 Chevrolet Camaro
Location (State): MO
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6
LS Engine?: Fits LS Engine

I have decided to part my entire car out. I built the car 4 years ago and maybe put 5,000 miles on it. The transmission, converter, and drive shaft have less than 300 miles on them as I melted a piston the 1st trip to the track after the swap. Email me if you have any questions. I can take pictures of stuff if needed. The car made 507 rwhp through the stalled auto and full exhaust. I will not ship large items. If you want injectors or cam, I can ship that. If I'm going to ship the part, you can pay me through paypal. Shipping costs will be added to the prices below. These parts have and are for sale locally (the reason why things are missing). Do not ask for anything not listed.

ENGINE
ENGINE COVERS (FRONT, REAR, LS2 VALLEY, ROCKER ARM) $300
FUEL INJECTOR HARNESS ADAPTERS LS1 PLUG TO LS2 INJECTOR $30
FAST 65 LBS/HR LS2 INJECTORS $275
FULL SET STOCK ROCKER ARMS W/STANDS (INC. OFFSET INTAKE ROCKERS FOR USE WITH LS3/L92 HEADS) $100

TRANSMISSION (LOCAL PICK UP ONLY)
JAKE'S PERFORMANCE STAGE 3 4L80E W/TRANSBRAKE
FTI 3800 STALL CONVERTER
BMR MODIFIED X-MEMBER FOR 4L80E
B&M MEGASHIFTER
SPEARTECH WIRING HARNESS (T56 TO 4L80E) W/RELAY MOD TO USE 4L60E TRANSMISSION TABLES
TCI SFI CERTIFED FLEXPLATE
TRANSMISSION COOLER & AN LINES
CUSTOM DRIVESHAFTS UNLIMITED DRIVESHAFT, 1350 U JOINT, YOKE & LENGTH FOR 4L80E
TRANSBRAKE SWITCH
STOCK DIPSTICK TUBE
ALL FOR $4,000

MISC
MOTOR MOUNTS (STOCK) $50
STOCK TRANMISSION MOUNT $10

 

In for the t-stat and tranny mount.

PM sent.

 

All relevant PM's replied to. Like the post says, I will not piece out the car itself, and I only have the parts I have listed above. Please don't PM me asking for other stuff.

 

Payment sent on poly tranny mount. Thanks.

 

would you sell just the tranny? How much?

 

I'm trying to sell the whole setup first. If I can't sell the package, I'll piece it out and let you know.

 

Where in mo? Might be interested in the car, it's more then I was wanting to spend but do you have any pics? Sell it with no rear end?

 

I'm in Arnold, MO. The car will have a stock 10-bolt in it. PM your email address and I can send you some pictures. The car is on jack stands and is filthy sitting in the garage. Do you want pictures of anything in particular?

 

Sorry I didn't see the pic u posted. (Didn't show up on my phone)

If can get enough cash ill get ahold of u and come see it in person. Your only 45min away.
Thanks

 

Sounds good. Let me know.

 

Will fast injectors only fit fast intakes/fuel rails? If they will fit a factory setup, i'll take them.

 

how much for the stock idler pulley with washers and bolt that are connected to the alternator bracket?

Need it asap and paypal ready. pm me please

 

if you change your mind about shipping the trans stuff let me know. glws.

 

Pics of the torque arm

 

I ran them with an L76 intake and an LS2 fuel rail. I'm not sure, but the might fit using an LS1 rail. Either way, you don't have to have FAST stuff to run these injectors.
None of that is on the list.
Will do. I've had several local people interested. I was afraid the shipping would be more than anyone would want to pay.
It's this exact torque arm:
http://www.jegs.com/i/BMR-Fabricatio...ductId=1667158
I didn't really want to try and ship that as it's bulky.

 

Willing to selling bnr cross member an converter?

 

The crossmember has been modified to work with a 4l80e. Do you have a 4l80e? It will not work with a 4l60e. I'd like to keep the whole package together for someone. If it goes a while without selling, I'll start breaking stuff up.

 

Yea i got a 80e in the works

 

Would you be willing to sell the vent rings for the ac??? If they are black that is

 

Do you have the alternator bracket with pulley ?