S475, T6 flange, Stock LS1 cams/springs/pushrods, misc.
S475, T6 flange, Stock LS1 cams/springs/pushrods, misc. Category: Engine - Power Adders
Price: $1850
Location (State): TX
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS2/LS3/LS7/L92/LS9, LS1/LS6, LT1/LT4, Small Block, Big Block
LS Engine?: Fits LS Engine
Location: Houston, TX
Contact: pm me for phone# if needed. PM with questions
Payment: paypal/cash if local
Have decided to take my build a different route, and have a bunch of boost related parts, or if interested a 90% complete turbo setup.
Shipping is included with all prices, and includes tracking and insurance. Local pick up also welcome, and will adjust price for local pick up. All prices are obo if not labeled.
Items are as follows with price, pics below. I can take more pictures if needed.
New never used Borg Warner S475 T6 1.32 hotside. Has been out of the box 4 times. SOLD to trans am88
Greddy Type R 47mm adjustable wastegate. Used, zero issues with boost spike/creep. Missing adjustment screw, but easily replaced. No flanges or dump tube. $300obo will include shipping.
GM 28lb/hr injectors, pulled from running 04 LS1 with 72k miles. P/N-12561462. SOLD
CX Racing 31x12x4 front mount intercooler, with 3'' fmic pipes. Used, but in good condition, no issues at all. Will include 3'' bov adapter pipe with new HKS SSQV bov already mounted. SOLD
2- 2.5'' SS v-band, new never used. SOLD
2.5'' SS manderl builders kit, non-expanded. 9 piece set as pictured. SOLD
T6 SS turbo flange. New, never used or mounted. SOLD
Cloyes Double roller timing chain. Used, has less than 20 miles on it. This was swapped for an SLP double timing chain and HV oil pump. SOLD
Autometer 4401 Boost gauge. New, still in the box, all adapters/light, even the sticker. SOLD
F-Body Alternator bracket set. Pulled from my LS1 for CBR bracket, good condition. Original bracket from my engine with 55k miles. SOLD
Pictures:
This setup was planned to be used on my Lexus SC, and the SS pipes were being measured to use with truck mani's and a couple of flex pipes. Only needs a few small items and some welding to be a complete turbo setup.
I will sell the complete list of parts above for $1550 and will cover half the shipping cost if needed.
For those with questions about my lack of post count, I can understand the concern. I have been a member since 2010, but used the forums to gain knowledge and as a resource. So not alot of posts. If anyone would like to check my iTrader feedback on clublexus.com, my username is the same, and have plenty of members/moderators there that can vouch for me if needed.
PM with questions. Items to be shipped will be shipped 1-2 days after cleared payment. For local Houston pickup, I can meet you, or you can come to my house and check everything out.
Last edited by turbodremz; Sep 20, 2014 at 11:46 AM.
Midweek bump. Need these last few parts gone, feel free to make offers.
Turbo, gate, t6 flange, timing set, and injectors still available. Added F-body alt bracket.
Turbo, gate, t6 flange, timing set, and injectors still available. Added F-body alt bracket.
Last edited by turbodremz; May 14, 2014 at 08:16 AM.
Trending Topics
Final bump for the S475, Cloyes timing set, gate and injectors. If they dont sell by Saturday, Ill be keeping them. Last chance, just too many low ball offers so not going to push it much further.
Bump it up. Still considering selling the S475, but the price is firm.
Also have a couple of stock cams for sale.
2000 LS1 T/A cam/springs/pushrods P/N 09654079280 (all factory, under 60k miles). $75obo shipped (?). This is the factory cam from my LS1 build, was swapped for a bigger cam. (springs and pushrods not pictured, but I can get them if needed.)
2004 5.7 GTO P/N 1721S174047 cam/springs/pushrods, also factory stock cam and under 60k miles, was swapped for MS4 cam. $75obo shipped (pushrods not pictured)
box of the stock springs
Also have a couple of stock cams for sale.
2000 LS1 T/A cam/springs/pushrods P/N 09654079280 (all factory, under 60k miles). $75obo shipped (?). This is the factory cam from my LS1 build, was swapped for a bigger cam. (springs and pushrods not pictured, but I can get them if needed.)
2004 5.7 GTO P/N 1721S174047 cam/springs/pushrods, also factory stock cam and under 60k miles, was swapped for MS4 cam. $75obo shipped (pushrods not pictured)
box of the stock springs
Last edited by turbodremz; Aug 20, 2014 at 12:49 PM.
Bumpity. Wastegate, stock cams/springs/pushrods, S475 and T6 flange, and the Cloyes Double roller still available. Prices are all obo except the turbo.
Ad will be up for another week or so, then the cams are turning into table lamps, and the turbo will sit in the box and wait the new engine..or Ill buy a diesel. The timing chain will make a nice wall clock.
Ad will be up for another week or so, then the cams are turning into table lamps, and the turbo will sit in the box and wait the new engine..or Ill buy a diesel. The timing chain will make a nice wall clock.
