Category: Drivetrain
Price: $1234
Part Fits: 2010+ Camaro, 93-02 Chevrolet Camaro, 93-02 Pontiac Firebird, Corvette
Location (State): MD
Item Condition: Brand New
LS Engine?: Fits LS Engine

Well i think the time has come to give up on my 4 year project i just dont have the time needed to finish the build.
All parts are brand new and some dont apply to you guys however the driveline and turbo's do!
I have been putting together one fine setup with the best of parts that i will try my best in listing including a near perfect custom black body with 200hrs of work and a boxed,braced,welded and notched frame.

The car was being build for a LSX 427 with twins and a 4L80e trans to make 1400whp on mild boost not much money was spared!

Here is some of whats here,

Body and frame as mentioned above on new poly body bushings SS lines and braided fuel lines custom fuel filter

Moser M9 35 spline with wavetrac posi powdercoated gloss black

Wilwood 6p front and 4p big brakes

Umi roto joint rear control arms upper and lower

Umi rear pro touring sway bar

Ridetech front and rear coilovers

Ridetech muscle front sway bar

SC&C front frame brace

Rushforth rated x wheels 18x9" front and 18x11" rear with Falken azienas k615 255 fronts and M/T ET street 2 DR's 305/35 rear

RPM built LVL 5 4L80E trans good for 1200hp

Billet FTI converter 3600stall for FI

LME built LSX block 427CI all forged Callie internals Mast 305 heads T&D shaft rockers custom Propan oil pan Aluminum Reactor flexplate Ati balancer morel Cam motion custom cam manton pushrods Arp studs/bolts,ect

Polished Precision metal craft intake LS7 port 102mm inlet

Twin hybrid garrett BB 67mm turbos polished and coated

Up and forward turbo headers SS

Tinted renewed tail lights

NOS headlight bezels

All bolts are ARP SS 12pts everywhere on the body and suspension

All body parts are at the paint shop doors are shaved to match the body with new fiberglass fillers and much more that i'm missing. Feel free to ask about anything listed or not i'm still in the process of putting a price on things so bear with me!

 

watching this thread

 

how much for the ride tech coil overs n what is the spring rate on them ?

 

The coil overs are the HQ single adjustables and i dont remember the rate on the springs i have it somewhere but it was what most Gbody guys were running with good results and springs are cheap to swap also if not perfect.
Paid $1550 for the front and rear coilovers i'd do $1400 shipped for the set as i said they are new just bolted on and the springs were powdercoated black instead of blue.

 

pm me a price on the wheels (pref without the tires), the headers, trans, and converter

 

Some pics!

 

More and still plenty buried in my garage!

 

Bump!

 

Pricing for some parts:
Engine minus intake $12K
Trans $3800
Twin 67mm Garrett hybrid BB turbos polished and coated housings $2600
Circle D reactor flexplate with longer arp bolts $400
SS turbo headers $600
Precision metalcraft intake LS7 port show polished $2700 shipped

 

i'll take the headers. i'll contact you tomorrow re:payment (either text or pm.)

 

Headers and converter sold!

 

transmission have a trans brake?

 

PM sent

 

No brake in the trans.