Category: Accessories
Price: $1800
Location (State): OK
Item Condition: Used
Shipping Information: Item Can be Shipped
LS Engine?: Fits LS Engine

I have a polished Vortech V1 T Trim Race with a RMCR bracket for 98-02 F Body, the head unit has low miles. The head units alone go for $3000. And the RMCR bracket setup for a tad over a grand. For everything listed REDUCED TO 1800 Firm plus shipping and paypal. Selling because I'm not wanting to modify the hood on my SS convertible. Fits Trans Am without modification but the head unit wont clear the cold air built into the SS hood. Not looking to separate thanks for looking. Stephen

Parts included:

-Polished Vortech V1 T Trim
-Rmcr Bracket
-2 Rmcr pulleys 3.100" 2.850"
-Belt tensioner
-3 supercharger pulleys (not sure of size)
-Lower crank pulley
-6 belts
-various silicone hoses

 

All pms replied

 

bump!

 

Reduced price for quick sale! All PMs returned. I've got 4 kids to buy presents for!

 

So all you'd need to complete the setup would a FMIC and cold side piping?

 

Bypass valve. Then your engine mods.

 

Would this blower not mix well with a SBE LS1?

 

I dunno what your compression ratio is but you can always add meth injection to offset if your cr is too high.

 

Friday night bump. Also wanted to add this is the 8 rib setup. No more slipping belts.

 

Saturday bump

 

Out of curiosity...you bought this a few months ago, why are you selling it.

 

op states this setup won't fit a Camaro w/o modification of the hood

 

This is true. I called RMCR directly and talked with them about it. It will fit a Z28 hood, Firebird hood, or WS6 hood without modification.

 

Is there anyway to verify how many miles are on the blower?

 

I had this supercharger a long time ago and I don't think It,s been used since. I bought it with the RMCR brackets and ran it on my car for about 2 years(maybe 1000 miles) before going to a ysi. It was in perfect running cond. when I pulled it off. I hope this helps

 

So with this blower and bracket setup, it's really no different than a D1SC Procharger in terms of routing the piping and setting up the intercooler?

 

D1SC mounts low. This one mounts higher.

 

Humpday bump

 

Will this setup retain ac and stock accessories if so I'm really interested would you accept PayPal and ship to TX

 

Yes and Yes