Category: Accessories
Price: $1250
Part Fits: 93-02 Pontiac Firebird
Location (State): MN
Item Condition: Used
Shipping Information: Item Can be Shipped
Engine: LS1/LS6
LS Engine?: Fits LS Engine

Looking at parting out some of my FI engine. The engine was a 390ci LS and made 1071/1112 at the wheels through a 4L80 and 9" on 22.5psi and 15* of timing on Pump E85.

All parts are located in Rochester, MN (55902). I can ship parts, but will be charging for shipping. I will utilize the UPS calculator and go from there. Everything is currently tore down and should be able to ship within a couple of days (some of the large items might take a little bit to get packed properly). Smaller items will ship the day after payment.

I will accept Paypal or cash. All Paypal expenses will be covered by the buyer, but I also accept through Paypal gift. I will try to respond to questions as soon as possible. Let's make some sales.

Crankshaft: SOLD
- Callies Compstar, part number: AP#31Q-CS.
- Serial Number: 120642.
- 4340 Forging.
- 3.825" stroke.
- 24x reluctor.
- Purchased in 2013.
- Cammed for a 6.125 Rod and prep balanced at 1785 BW from Callies.
- Price: SOLD


Connecting Rods: SOLD
- Callies Compstar H-beam.
- 6.125 length, 2.100" crank pin, .927 wrist pin.
- Includes ARP 2000 fasteners,
- #CSC6125DS2A2A.
- Price: SOLD.



Cylinder Heads: SOLD
- GM 243 heads, ported, 63.5cc.
- Manley Stainless Steel Intake Valves #11362-8, 2.020 in. Diameter, .313 in. Stem.
- Ferrea Super Alloy Exhaust Valves # F1892P, 1.600 in. Diameter, .313 Stem Diameter, Turbo Application.
- Brian Tooley Racing .660" Lift Platinum Dual Spring Kit with Steel Retainers.
- See Photo for Flow Numbers.
- Price: SOLD



LS7 Lifters: SOLD
- GM #12499225
- Price: SOLD.




Pushrods: SOLD
- Manley Chromoly Steel.
- 5/16” diameter, 7.4" length.
- Manley #25735-1
- Price: SOLD.



Camshaft: SOLD
- Comp Cam spec'd by AES.
- Used in my twin turbo application. Probably better for NA.
- 238°/240° Duration.
- .605/.609 lift.
- 112 LSA, 110 CL.
- Price: $150 plus shipping. SOLD



Head Studs: SOLD
- ARP Pro Series Cylinder Head Stud Kits 234-4317.
- 12-Point Head Stud Kit, 2004+ Blocks.
- Used. Approximately 3000 miles.
- The photos only show 19 of the large studs. I am searching for the last one around my garages. If I don't find it, I will order a stud to complete the set.
- Price: SOLD

 

Added Head Studs to the listing:

Head Studs:
- ARP Pro Series Cylinder Head Stud Kits 234-4317.
- 12-Point Head Stud Kit, 2004+ Blocks.
- Used. Approximately 3000 miles.
- The photos only show 19 of the large studs. I am searching for the last one around my garages. If I don't find it, I will order a stud to complete the set.
- Price $225 Shipped.


Have had interest in the Crank, Rods, Heads, and Cam already.

As always, nothing is sold until at least a non-refundable deposit is made.

 

Pm sent for head studs

 

Responded.

 

Cam is SOLD.

 

Would you take $1100 for crank and rods and I provide shipping label?

 

Private message sent to you.

 

Cam has shipped.

Picked up the head studs from the engine shop. They weren't the set that was included on my invoice.

They are the ARP 234-4317's instead of the 16's. Updated the post.

 

Weighed some of the larger components tonight:

Crankshaft: 52lbs. Approximate box dimensions: 24"L x 10"H x 10"W.

Rods: 11.4lbs. Should fit in the USPS Medium Flat Rate Box. About $13 shipping.

Cylinder Heads: 24.2lbs each. Approximate box dimensions: 22"L x 8"H x 10"W.

My plan would be to ship these with UPS Ground. Please go to UPS's website for approximate costs. Shipping from Zip Code 55902.

 

Bump it up.

The other head stud is at the engine shop. Will get updated pics with the full set soon.

 

Grabbed the other head stud today. Full set again.

It has to be payday for somebody on Friday. Let's make some sales. Won't have much cell phone reception on Saturday and early Sunday.

 

Late weekend bump.

 

Rods are SOLD and shipped.

 

Blizzard bump. Supposed to get hit with 8-14" of snow today. Will do my best to ship within a day. Let's make a sale.

Lots of interest, but everybody wanted too good of a deal.

 

What pistons did you run?

 

A set of Diamond Racing Pistons. Planning to reuse them in the LSX Block.

4.03" Bore.

 

Bumping it up.

 

Crankshaft is SOLD.

 

Head Studs are SOLD.

 

Weekend Bump.