Magnuson 2300 Cathedral Truck Spacing Innovators West 8 Rib
For SaleEngine - Intake/Fuel
-
Price
$5,000• OBO • Trade
- Location Angleton, TX, 77515, USA
- Condition Used
Description:
Like he title says. Bought for the wife’s Saab 9-7x Aero TBSS. Will fit anything with truck pulley spacing and Cathedral Heads.
Supercharger (needs a manifold bolt kit or source at Fastenal)
2 Blower Pulleys for boost changes
Valley Plate
Innovators West SFI 8 Rib setup
Standard and HD Tensioners
Heat Exchanger
Original water Pump and plumbing
Aluminum Ice/H2O Tank with Rule Pump
PCM of NC Fender Air Filter Kit with LS7 Maf
Set of 1000 Injectors (choice of new FIC or the like new IDs that were in my Formula)
GP Tuning 226/240 PDS Camshaft used but on the Gold Core
Alky Control Kit with separate fuel cell tank
I believe I have a crank pin kit too)
That’s what I can recall. My stuff is nice. Too much to go wrong to ship it so road trip it and if I find anything that I forgot, I’ll add it. Reduced.
Had a question about #1 cylinder having a crack. Good eye from SP, I never noticed it before (it stays in the house covered up). I’ve never mounted it to anything.. That said, I would run it as is and and very well might if nobody buys it. Actually have two of the Saab Aeros but trying to limit mods to the Formula these days.
https://magnusonsuperchargers.com/co...1-19-60-105-bl
Mine has one more rib than the one shown in the 1900 kit. I’ll continue to verify.
Last edited by 007FJ; 04-15-2024 at 05:23 PM.
They do offer the 2300 with the shaft through the front support for that application.
I believe I see 7 ribs in the center of the case so it should in fact be a TVS2300. I Stand corrected and will delete my previous post. My Apologies
By the way a lower tub is available should some one want to replace it.
Trending Topics
I don't like to give the wrong information. And in this case I WAS WRONG!
They are still open in California, its only 2:40PM here so I called to find out.
Last edited by 007FJ; 04-19-2024 at 07:59 AM.
He can change his accessories to a 5th gen Camaro setup and it would work. I've done this similar swap. 5th gen Camaro has the same spacing as a truck/tbss.
I thought that was the case on the 5th G accessories but hadn’t researched so I wasn’t about to say yes.