I bought this from another member and have had it sitting around for awhile now. I dont really have anything to put in on so Im going to sell it. The previos owner told me it is made by BECK which is one of the sponsors. It is drilled and tapped for 1/8 inch fogger nozzles. It has plugs in it now. It takes a stock throttle body but could easily be modded to use 90mm. It will need aftermarket rails and modified stock rails . I got a set of stock rails to work with some bending the rails and grinding on the intake.I dont have them anymore. You will need a set of gaskets from Mr. Gasket for a Holley intake. The intake is not perfect but will be nice once cleaned up and some details worked out. Also you will need to modify the bottom cover on your car .The edges will need to be milled down so the intake can sit down on the heads correctly. Will clear the stock hood and cowl. Has all the provisions of the stock intake.

I paid like 600 shipped
You pay 275 shipped firm.Sold

 

Wish I could use or i'd buy it!

Alan

 

Sale pending but I will let everyone know on saterday afternoon if I got the money. I will take a second and third in line.

 

to the top. I havent gotten a word from the buyer yet so we'll see if its still for sale tomarrow when the money order comes or not.

 

to the top buyer never sent money. Still for sale.

 

I sent you a PM last night. Interested. PM me back

 

How does this compare to an ls6 intake or a fast?

 

This is for high rpm and boost. You will loss low end torque but make alot of power up high. If your boosting it then whenever boost comes in it will make the power. This is not for an almost stock setup. You will make power between 4000-8000 rpm. If you have a blower you will probably not feel any loss once boost comes in then it will have a direct path into the cyliders.

 

Intake is sold to LOSTPATROLMAN thanks for lookin everybody.