Two injection-connection boost control solenoids
Same ones used in all the top of the line electronic boost controllers like the NLR AMS-1000 unit and etc.
$75/each new.
Sell for $45/each.

Billingsley HVAC delete plate
Aluminum plate to block off the area where the HVAC stuff used to go in 4th gen fbodies.
$40

One set of LS1 cam/crank position sensors
$50 per set of cam/crank sensors.

LS1 front coolant steam line
$5

Turbonetics manual boost controller
TNT-10402-25
$80 new from summit. Will include some line/fittings for it as well. Held boost rock solid in my twin turbo setup (have logs in case anyone wants to check it out).
Sell for $50.

PCV system from my LS1 setup
Moroso catch can with two -10 fittings on it.
-10 hose with fittings on both ends to hook into your valvecovers and then into the catch can. Worked great on my twin setup and mounts perfectly behind the passenger side wheel well in the 93-02 fbodies. Would work on any car also. Have over $150 into it.
Sell for $75.

I will be listing things as I run across them. The more stuff you buy, the more free stuff I can throw in. I just want to get rid of this stuff and get the garage cleaned up for the new ride. Best offers on everything.

LTLHOMER@aol.com or PM me on here.

 

Can I get some pictures of the PCV setup to baldurann@hotmail.com? Thanks!!

 

I'll take the 4.5' of -6 aqp stainless line. whats your paypal? for 10bux

 

i will take the tci flexplate...can paypal as well...need total shipped to 30126...suburb of Atlanta Ga

 

All the hoses/fittings were picked up locally...updating the rest of the list as I type.

 

ttt for a great seller! payment sent on the 2 fans! thanks Sean.

 

I'll take a set of the cam/crank sensors and the pillar/guage combo.

 

TCI SFI Flexplate
Used it on my ls1 setup but I believe it's good for regular sb chevs/fords as well since it has multiple converter locations.
$50

I would like this if it isn't sold. Let me know.

Thanks

 

Two permacool 12" high-performance electric fans
$100/each new from summit.
Mounting Area Req'd: 12-1/2" x 12-1/2" x 3-3/4"
Est. CFM: 1650
Motor RPM: 2400
AMP Draw: 7.5
Fuse Size: 30 AMP

how did you have these mounted? any pics?

 

Updated list.

 

how did the tci flexplate just disappear? I was the 3rd response you had and then several days of NO response from you.....actually I never got ANY response.

 

Someone pm'd me before you posted and we were working out shipping and payment. Did you just want to talk maybe have coffee?

 

no coffee...i am afraid it would get cold before i got it,,,,or i'd wonder if you got lost. Good luck on your sale!!

 

ill take the HVAC delete..send pics to transam6383@yahoo.com

 

I'm guessing soy chai tea's are right up your alley.

 

It looks like a flat piece of aluminum. Do I really need to take a pic???

 

pics of the PCV catch can...very interested and have paypal ready to go.

 

If you need anything more detailed let me know...but it's pretty much a can, with two -10 weld fittings, and then socketless hose and fittings to run them to your valvecovers...let me know. And the can has a breather on it.

 

i will take the hvac plate pm me your address and i will send a money order off tomorrow morning

 

I think someone already has spoken for it. I'll let you know when I find out though.