hey gang i have a couple of things that someone i think may need item umber

1.i have an slp drive shaft loop was on the car but doesnt work with my exhaust so has to go 75 bux sold

2.i also have an slp maf 85mm as well as the slp lid that goes with it.went with a carbon fiber and a different maf my loss your gain.these retail for around 300 shipped i can do 175 for both.will split if need be.sold

3.i have a pcm from a f-body as the one i had purchased awhile back was not for an f-body so i bought another one and as luck would have it they reflashed the original one i had bought now i have a spare that i don't need.it was in the car to start the new motor while waiting for finishline to street tune the other.it came out of a 99 ls1 trans am. i bought it for 200 i can do 140 bux worked like a charm.

4.i have a turbo 400 trans along with a precision stall not sure the stall forgot.it needes a tail shaft housing but other than that works just fine around 10k on a rebuild.was not in a race car but the new one was ie the reason i have this one laying around anyway with the stall 150 bux takes it.

5.i have a precision stall 3600 for an ls1 with about 3k on it no trak time and never had a power adder to it either.worked great when removed 300.sold

6.have a short block with rotating assembly that is apart to inspect.a rod bearing was spun but the crank can be turned if need be.400 bux shipping could be a nightmare but can be done.

7.i have an slp otion muffler(just the muffler that had the quad tips nothing else) sounds killer but i went louder 100 bux.

8.stock rotors of a 02 ram air t/a around 8k on em zero warpage 30 bux.

9.stock spare tire 30 bux

the items listed are not with shipping buyer is reasponsible for that but because i am a buissness man i will wave the 3 percent on the paypal fees thanks for looking.

 

ttt.......... for da day

 

PM'ed u

 

maf and stall pending sale all else is still available offers are excepted.

 

pm on driveshaft loop

 

PLEASE PM me back a.s.a.p.!!! I've sent you about 3 pm's

 

where are you located?

 

how much for the 85mm lid?

 

PM'd you my address for the TH400 precision verter...can't send me anything without that. LOL

 

northern illinois

 

i have a picture phone if that will work where do ya want it sent the picture that is

 

[QUOTE=Ego Killer]how much for the 85mm lid?[/QUOT 65 shipped

 

[QUOTE=blkmgc1]
if you dont mind shoot me a pic and Ill take it...it does fit over the 85mm MAF right?

 

[QUOTE=Ego Killer]does it match up with the maf yes if that helps. pp is areyouwired@comcast.net ill have it out monday im working the rest of today ttyl ill check for payment later.

 

updated list ttt for the day