Patriot Stage 2 Heads For Sale

--------------------------------------------------------------------------------

I am selling my Patriot Stage 2 Heads..I recently had one of the seats professionally replaced along with 1 exhaust valve..Heads have been looked over and giving a clean bill of health..They have Ferra 2.05 intake valves and 1.60 stainless exhaust valves. They are stamped Patriot on the front of the heads..Heads come complete with almost new Patriot Dual Springs...$800 and the heads are yours..
These heads are too big for my stock cubes..Most likely would benefit more with larger cubes..They are 62 cc chambers and the casting numbers have been grinded off by previous guy..
__________________
World's Fastest 100% Bone Stock LS6 On Spray.
1997 coupe with a ls6 motor and 150 hp dry shot.
10.7@130mph,1.50 60ft, 6.8 1/8 mile
533 rwhp and 512 rwtq.
Best 1/4 mile per hour of 131
Only mods are nitrous and 3200 Vigilante

 

--------------------------------------------------------------------------------






__________________
World's Fastest 100% Bone Stock LS6 On Spray.
1997 coupe with a ls6 motor and 150 hp dry shot.
10.7@130mph,1.50 60ft, 6.8 1/8 mile
533 rwhp and 512 rwtq.
Best 1/4 mile per hour of 131
Only mods are nitrous and 3200 Vigilante

mitymikec
View Public Profile
Send a private message to mitymikec
Send email to mitymikec
Find More Posts by mitymikec
Add mitymikec to Your Buddy List

Today, 02:11 PM #3
mitymikec
CF Senior Member





Member Since: Apr 2004
Location: ottawa ontario


My Corvette Photos



--------------------------------------------------------------------------------

ttt
__________________
World's Fastest 100% Bone Stock LS6 On Spray.
1997 coupe with a ls6 motor and 150 hp dry shot.
10.7@130mph,1.50 60ft, 6.8 1/8 mile
533 rwhp and 512 rwtq.
Best 1/4 mile per hour of 131
Only mods are nitrous and 3200 Vigilante

mitymikec
View Public Profile
Send a private message to mitymikec
Send email to mitymikec
Find More Posts by mitymikec
Add mitymikec to Your Buddy List

 

 

watching is that the best price?

 

So these would be too big for a cammed/full exhaust LS1?

 

Well i think if my car was a 6 speed with gears or had at least a 4000 stall they would be perfect..The car pulls hard from a bout 3000 rpm right to 6800..I have more then the $800 in then..Anyone that is serious and wants to make me a real offer i may consider it..They are ready to ship once i receive the $$$$$

 

What size cam were you running with these heads? Or no cam? Can you send me more pics to Donnyd21@aol.com (more of the C.C.)?

 

what do these heads flow?

 

It's my opinion that a 227cfm runner is too big for stock cubes..I think smaller runners on stock cubes would give u better torque down low and the bigger runners would give u better HP up top..That's my opinion..Some ppl may not agree..

I believe Stage 2 Patriots flow 304 intake and 230 on the exhaust..These heads have 2.05 valves instead of the regular 2.02..

I will post a few more pics ..

 

 

The specs you are saying dont match the specs on the site? http://www.lmperformance.com/4806/1.html

 

What specs? They are stage 2 patriots..If i am off by a few CFM sorry..look them up or call them and ask them what stage tow would flow...I have been on vette forum for yrs and not trying to misguide anyone..just going a different route..

 

These are not LS1 heads..They are the LS6 style heads.. So maybe that is why the specs don't match..They are for 3.9 bore.

 

Need the $$$$$ lets make a deal

 

http://www.patriot-performance.com/w...05234&DID=1225

 

What the lowest you will take shipped? And is there a pic in here of the repaired part?

 

The repaired part is a seat which u can't see when the valves are in there..
I would consider letting them go for $800 shipped..I have well over that in them..If that is too much for ya make me an offer i can't refuse..

 

250 views and they still r not sold..what's up guys?

 

If I weren't running a reverse split cam I would be all over these, free bump for ya.

 

Someone buys these heads from me..