cam and heads

 
Thread Tools
 
Search this Thread
 
Old Jan 10, 2008 | 04:49 PM
  #1  
z28maroman's Avatar
Thread Starter
On The Tree
iTrader: (2)
 
Joined: Aug 2006
Posts: 103
Likes: 0
Default cam and heads

hey guys i live in the chicago area in joliet and i have a ms4 cam and a set of 853 heads. the cam is brand new, but was put into the car to check clearance (did not have clearance with the heads i purchased from the speedshop) if you have any doubt on this you can call speed inc and ask for larry or email him at larry@speedinc.com. i still have the cam card also. it is 239/242 @111lsa.... i am asking $385 shipped.. i have the orginal receipt which reads $407.32. the heads are casting #853 with aftermarket z06 valves, milled 30 thousanths with comp 918 springs that are brandnew. one of the heads are completly cleaned up but the other one is still pretty dirty... they need to be cleaned up and if you want they still have alot of room to be ported more. im asking 200.00 plus shipping. i will post pics this weekend of the heads and i will have pics of the cam up tonight when i get home. thanks guys

Last edited by z28maroman; Jan 12, 2008 at 11:36 AM.
Old Jan 12, 2008 | 10:58 AM
  #2  
z28maroman's Avatar
Thread Starter
On The Tree
iTrader: (2)
 
Joined: Aug 2006
Posts: 103
Likes: 0
Default











Last edited by z28maroman; Jan 12, 2008 at 11:00 AM. Reason: wrong codes
Old Jan 12, 2008 | 11:00 AM
  #3  
z28maroman's Avatar
Thread Starter
On The Tree
iTrader: (2)
 
Joined: Aug 2006
Posts: 103
Likes: 0
Default

T T T
Old Jan 12, 2008 | 04:43 PM
  #4  
z28maroman's Avatar
Thread Starter
On The Tree
iTrader: (2)
 
Joined: Aug 2006
Posts: 103
Likes: 0
Default

open to offers
Old Jan 13, 2008 | 01:32 AM
  #5  
z28maroman's Avatar
Thread Starter
On The Tree
iTrader: (2)
 
Joined: Aug 2006
Posts: 103
Likes: 0
Default

any one?
Old Jan 13, 2008 | 11:21 AM
  #6  
z28maroman's Avatar
Thread Starter
On The Tree
iTrader: (2)
 
Joined: Aug 2006
Posts: 103
Likes: 0
Default

bump t t t
Old Jan 13, 2008 | 11:48 AM
  #7  
miller456's Avatar
TECH Enthusiast
iTrader: (36)
 
Joined: Jul 2007
Posts: 660
Likes: 0
From: Omaha, NE
Default

I'm sure this cam will be sold sometime shortly but if not by end of next week I will be in contact with u. I would buy it now but I just bought an ls6 intake. Suscribed
Old Jan 13, 2008 | 11:53 AM
  #8  
z28maroman's Avatar
Thread Starter
On The Tree
iTrader: (2)
 
Joined: Aug 2006
Posts: 103
Likes: 0
Default

alright sounds good thanks
Old Jan 13, 2008 | 04:37 PM
  #9  
Rare99Z's Avatar
TECH Apprentice
iTrader: (35)
 
Joined: May 2006
Posts: 380
Likes: 0
From: Mokena, IL
Default

how much for the cam if i pick it up, I live 2 minutes from joliet? pm me with the details. thanks
Old Jan 13, 2008 | 08:17 PM
  #10  
z28maroman's Avatar
Thread Starter
On The Tree
iTrader: (2)
 
Joined: Aug 2006
Posts: 103
Likes: 0
Default ms4 cam

pm sent
Old Jan 14, 2008 | 07:29 PM
  #11  
z28maroman's Avatar
Thread Starter
On The Tree
iTrader: (2)
 
Joined: Aug 2006
Posts: 103
Likes: 0
Default

up up up
Old Jan 14, 2008 | 08:37 PM
  #12  
z28maroman's Avatar
Thread Starter
On The Tree
iTrader: (2)
 
Joined: Aug 2006
Posts: 103
Likes: 0
Default

ms4 is sold... heads are still up and taking offers. the springs are brandnew! MAKE ME AN OFFER! if you come and get them you can have an even better deal if ur local.. let me know
Old Jan 14, 2008 | 11:45 PM
  #13  
Pewter00TA's Avatar
Teching In
iTrader: (5)
 
Joined: Feb 2007
Posts: 33
Likes: 0
From: Oak Lawn, IL
Default

Got pics of the heads? If so email them to KDertz21@yahoo.com, I'm in Chicago.
Old Jan 27, 2008 | 12:45 PM
  #14  
z28maroman's Avatar
Thread Starter
On The Tree
iTrader: (2)
 
Joined: Aug 2006
Posts: 103
Likes: 0
Default

T T T









 




All times are GMT -5. The time now is 04:17 PM.