parting out my 99 t/a
parting out my 99 t/a AS OF MAY 1ST, I WILL BE DEPLOYED. HENCE I WONT BE ABLE TO SELL ANYTHING ELSE. So, please if you want to get something, let me know. I can work with you. I would rather work with someone than to have the part sit for 6 months. That being said....
As some of you already know that my car was in a wreck recently, and I cant afford to fix it. So I have decided to part it out to try and get as much of the load paid off as I can. I already have the driveline sold, so dont ask about that. But as far as interior goes, its all fair game. I also have some decals from phoenixgraphics.com that I want to get rid of. I prefer not to ship anything. Sorry I dont have any recent pics of the car. The only thing that cant be reused is the rear bumper. Here's a link to see come pics of the car right after it was wrecked. Its partially rebuilt now. The front bumper and headlight have been repaired.
http://www.ls1.com/forums/showthread.php?t=73620
I am making an amend to my previous statment about the driveline. It is up for sale for $6K for everything. Here is the dyno sheet.
This is what the engine looks like
For the engine, I want $4K, for the trans I want $1800 (it will come with the clutch, but the SPEC 3 that I have is slipping, but you may be able to use some of the parts with your clutch), and the rear end with 3.73 gears I want $700, for the aluminum driveshaft $250
Here is a list of the mods to the engine.
Comp Cams Cam 222/224; chromoly pushrods 7.4" and roller lifters
Hooker LT's w/ custom Y-pipe and Magnaflow muffler
MSD 8.5mm plug wires and NGK iridium plugs
BBK 85mm intake manifold
K&N air filter w/ SLP lid and bellows
SPEC stage 3 clutch and short throw shifter
It has an underdrive pulley and a new power steering pump pulley.
The engine has about 10K on it and the trans/rear end has 27K on it. (Blew the old engine so replaced it)
I am willing to ship, but will have to have some patience with me, and buyer has to pay for shipping All that I have now is a motorcycle as my mode of transportation. So just bear with me.
The rims are for sale too...They are corvette C6 rims powdercoated. They have a couple of paint chips in them, but overall look great. Has fairly new rubber all the way around. BF Goodrich G-Force T/A's (P245/45YR18) and Michilin Pilot sport (P305/30YR19)...I want $800 for all 4.
I really dont want to sell this, but I guess I will. Its my stereo. I want $1700 for everything. What it comes with:
7" Alpine flip up screen. DVD, MP3, is navigation ready, and has 3 AUX inputs
2 JL Audio 10" W7 subwoofers in a custom box
2 JL Audio 500/1 monoblock amps
2 1/2 Farad Capacitors
All of the wires that you need to make it work.
This stereo will outbeat most 12's and will not distort. Your factory stereo will distort before these subs will. I paid $500 per sub, $600 per amp, $70 per capacitor and its an $1800 screen, plus another $800 for the custom box and install. Needless to say, when it rattles off the hatch of your T/A or Camaro, it will turn a lot of heads. If you have any questions let me know.
As some of you already know that my car was in a wreck recently, and I cant afford to fix it. So I have decided to part it out to try and get as much of the load paid off as I can. I already have the driveline sold, so dont ask about that. But as far as interior goes, its all fair game. I also have some decals from phoenixgraphics.com that I want to get rid of. I prefer not to ship anything. Sorry I dont have any recent pics of the car. The only thing that cant be reused is the rear bumper. Here's a link to see come pics of the car right after it was wrecked. Its partially rebuilt now. The front bumper and headlight have been repaired.
http://www.ls1.com/forums/showthread.php?t=73620
I am making an amend to my previous statment about the driveline. It is up for sale for $6K for everything. Here is the dyno sheet.
This is what the engine looks like
For the engine, I want $4K, for the trans I want $1800 (it will come with the clutch, but the SPEC 3 that I have is slipping, but you may be able to use some of the parts with your clutch), and the rear end with 3.73 gears I want $700, for the aluminum driveshaft $250
Here is a list of the mods to the engine.
Comp Cams Cam 222/224; chromoly pushrods 7.4" and roller lifters
Hooker LT's w/ custom Y-pipe and Magnaflow muffler
MSD 8.5mm plug wires and NGK iridium plugs
BBK 85mm intake manifold
K&N air filter w/ SLP lid and bellows
SPEC stage 3 clutch and short throw shifter
It has an underdrive pulley and a new power steering pump pulley.
The engine has about 10K on it and the trans/rear end has 27K on it. (Blew the old engine so replaced it)
I am willing to ship, but will have to have some patience with me, and buyer has to pay for shipping All that I have now is a motorcycle as my mode of transportation. So just bear with me.
The rims are for sale too...They are corvette C6 rims powdercoated. They have a couple of paint chips in them, but overall look great. Has fairly new rubber all the way around. BF Goodrich G-Force T/A's (P245/45YR18) and Michilin Pilot sport (P305/30YR19)...I want $800 for all 4.
I really dont want to sell this, but I guess I will. Its my stereo. I want $1700 for everything. What it comes with:
7" Alpine flip up screen. DVD, MP3, is navigation ready, and has 3 AUX inputs
2 JL Audio 10" W7 subwoofers in a custom box
2 JL Audio 500/1 monoblock amps
2 1/2 Farad Capacitors
All of the wires that you need to make it work.
This stereo will outbeat most 12's and will not distort. Your factory stereo will distort before these subs will. I paid $500 per sub, $600 per amp, $70 per capacitor and its an $1800 screen, plus another $800 for the custom box and install. Needless to say, when it rattles off the hatch of your T/A or Camaro, it will turn a lot of heads. If you have any questions let me know.
Last edited by jwindbigler; Apr 7, 2008 at 05:21 PM.
If anyone has any questions, please call me at 619-947-1946.
Payment options:
I prefer paypal as it is safer and more secure for both sides. My paypal is jwindbigler@yahoo.com
or you can send a money order to me. I will give you the name and address upon request.
Payment options:
I prefer paypal as it is safer and more secure for both sides. My paypal is jwindbigler@yahoo.com
or you can send a money order to me. I will give you the name and address upon request.
Last edited by jwindbigler; Mar 18, 2008 at 12:31 AM.
