FS: P1SC-1 Procharger Kit

 
Thread Tools
 
Search this Thread
 
Old Mar 23, 2008 | 01:13 PM
  #1  
Snowboardr18's Avatar
Thread Starter
Banned
iTrader: (1)
 
Joined: Mar 2007
Posts: 50
Likes: 0
From: Mt. Airy, MD / Charlotte, NC
Default FS: P1SC-1 Procharger Kit

Used P1SC-1 Procharger Kit for 98-02 Trans Am
9 lb. pulley
Twin Intercooled

Not sure on exact miles. Last owner said it was recently installed when I bought it and I believe him because the belt was way too big and the car was not tuned for it. I have put about 8,000 miles since. Oil changed at 5,000 miles.

Often considered the cleanest blower setup. Hides the blower and intercoolers. Many people ask me where the blower is.

I am selling it to try a NA setup.

Located in Charlotte, NC until May, then Mt. Airy, MD

Kit Still on Car:








Intercoolers are located in the openings below the running lights/turn signals.


Brand New Owners Manual with Instructions from Procharger:







Kit Layed out as the instruction diagram shows:







Close Ups:
Clamps:


Intercoolers:




Head Unit:








Head Unit Bracket:


Bolts:


Not Pictured:
-42 lb. injectors included
-Cooling Fan Assembly

One clamp was scratched and bent from previous owner so I grabbed a new one to throw in.

Some of the bolts that hold the SC to the bracket were slightly rounded so I bought all new ones.

The bolts that hold the intercoolers to the car are also brand new.

The filter has a small chip out of it where it rubbed something. Still fine to use. I have a pic but would not fit into the post. PM me if you want to see it.

Crank hub pulley not included, one can easily be ordered from Procharger.

Add $50 for a brand new never used Sport Comp 30/20 Boost/Vacuum Gauge
http://autometer.com/cat_gaugedetail...id=2845&sid=15

Easy to install, you just need to get some relocation brackets to move the air pump, cruise control and horn.

Price $4,300 obo shipped, well over $6,000 new.

Price dropped to $3950 shipped. NEEDS TO GO

Last edited by Snowboardr18; Apr 24, 2008 at 11:57 PM.
Old Mar 23, 2008 | 05:19 PM
  #2  
ahhwataday's Avatar
TECH Enthusiast
iTrader: (7)
 
Joined: Jun 2006
Posts: 508
Likes: 0
From: Richmond, VA
Default

good price would buy but i want the D-1sc
Old Mar 24, 2008 | 03:57 PM
  #3  
MadIceV8's Avatar
Customizing Director
20 Year Member
iTrader: (12)
 
Joined: Mar 2002
Posts: 5,778
Likes: 4
From: SW Chicago, IL
Default

What size intercoolers (3.5 or 4.5)? Is it a 6 or 8 rib setup? Is the charger polished?
Old Mar 24, 2008 | 05:55 PM
  #4  
mycar2fast's Avatar
On The Tree
iTrader: (1)
 
Joined: Jan 2007
Posts: 178
Likes: 0
Default

bump for a good price, would you be willing to trade your metal plenum for my plastic one plus cash??
Old Mar 24, 2008 | 06:25 PM
  #5  
SSquid's Avatar
TECH Resident
iTrader: (4)
 
Joined: Jul 2005
Posts: 935
Likes: 0
From: Richmond, VA
Default

Hmmm I am actually really interested.... what would I need to put into this kit to make it complete on my SS? Or does it come with EVERYTHING to throw it on and then would just need a tune?
Old Mar 24, 2008 | 10:20 PM
  #6  
tamikews6's Avatar
On The Tree
iTrader: (13)
 
Joined: Dec 2005
Posts: 113
Likes: 0
From: Lancaster CA
Default

Interested in a trade and split shipping?

https://ls1tech.com/forums/showthrea...46#post8987746
Old Mar 25, 2008 | 05:23 AM
  #7  
james562's Avatar
TECH Fanatic
iTrader: (35)
 
Joined: Aug 2004
Posts: 1,016
Likes: 0
From: Paramount CA
Default

Originally Posted by MadIceV8
What size intercoolers (3.5 or 4.5)? Is it a 6 or 8 rib setup? Is the charger polished?
X2

Does this kit come with the SDCE crank pinning setup?
Old Mar 25, 2008 | 03:07 PM
  #8  
ShevrolayZ28's Avatar
TECH Addict
iTrader: (4)
 
Joined: May 2005
Posts: 2,318
Likes: 1
From: Massachusetts
Default

Originally Posted by MadIceV8
What size intercoolers (3.5 or 4.5)? Is it a 6 or 8 rib setup? Is the charger polished?
x3

Cooling fans? What size injectors?

Last edited by ShevrolayZ28; Mar 25, 2008 at 08:07 PM.
Old Mar 27, 2008 | 12:03 AM
  #9  
Snowboardr18's Avatar
Thread Starter
Banned
iTrader: (1)
 
Joined: Mar 2007
Posts: 50
Likes: 0
From: Mt. Airy, MD / Charlotte, NC
Default

I did not expect to get so much interest in this kit the first few days. I only put it on this site and have about 20 people looking at it. I have almost everything off the car but I will change tje advertisement when I get the rest off to answer all of your questions. Before now I was not including injectors but I may change the price and include them now. This is a 6 rib setup and the intercoolers are 3.5 inches.
Old Apr 19, 2008 | 01:15 PM
  #10  
Snowboardr18's Avatar
Thread Starter
Banned
iTrader: (1)
 
Joined: Mar 2007
Posts: 50
Likes: 0
From: Mt. Airy, MD / Charlotte, NC
Default

Back up for sale, ready to be shipped!
Old Apr 19, 2008 | 05:07 PM
  #11  
Snowboardr18's Avatar
Thread Starter
Banned
iTrader: (1)
 
Joined: Mar 2007
Posts: 50
Likes: 0
From: Mt. Airy, MD / Charlotte, NC
Default

Originally Posted by mycar2fast
bump for a good price, would you be willing to trade your metal plenum for my plastic one plus cash??
No thanks man, I think people will like the metal one a lot better.
Old Apr 19, 2008 | 05:48 PM
  #12  
billyb's Avatar
TECH Resident
15 Year Member
Photogenic
Photoriffic
iTrader: (15)
 
Joined: Mar 2006
Posts: 962
Likes: 0
From: fl.
Default ???????????????????????

Not Pictured: 42 lb. injectors included

One clamp was scratched up so I bought a new one to include.

All the bolts that hold the SC to the bracket are brand new.

The bolts that hold the intercoolers to the car are also brand new.
Old Apr 19, 2008 | 07:55 PM
  #13  
Snowboardr18's Avatar
Thread Starter
Banned
iTrader: (1)
 
Joined: Mar 2007
Posts: 50
Likes: 0
From: Mt. Airy, MD / Charlotte, NC
Default

Originally Posted by billyb
Not Pictured: 42 lb. injectors included

One clamp was scratched up so I bought a new one to include.

All the bolts that hold the SC to the bracket are brand new.

The bolts that hold the intercoolers to the car are also brand new.
What's the question?

The injectors are still on the car, will be taken off as soon as someone buys it. They can be seen in the 2nd, 3rd and 4th pics.

One clamp was scratched and bent up some from previous owner, not sure why.

One of the bolts that held the SC to the bracket was slightly rounded and I didn't want buyer to have a problem so I bought all new ones.

I could not get the bolts that mount the intercoolers off without moving some stuff and thought it would be easier to grab some new ones of the same size.

Last edited by Snowboardr18; Apr 19, 2008 at 08:05 PM.
Old Apr 21, 2008 | 11:54 PM
  #14  
Snowboardr18's Avatar
Thread Starter
Banned
iTrader: (1)
 
Joined: Mar 2007
Posts: 50
Likes: 0
From: Mt. Airy, MD / Charlotte, NC
Default

Keep the offers coming
Old Apr 21, 2008 | 11:59 PM
  #15  
99camaromike's Avatar
Teching In
iTrader: (1)
 
Joined: Aug 2007
Posts: 44
Likes: 0
From: NORTH READING MASS
Default

i will trade u 2005 trx 450r quad for it
Old Apr 22, 2008 | 12:51 AM
  #16  
andrewdruiz's Avatar
On The Tree
iTrader: (20)
 
Joined: Feb 2006
Posts: 101
Likes: 0
From: Riverside, CA (So Cal)
Default

Nice.
Old Apr 23, 2008 | 03:09 PM
  #17  
Snowboardr18's Avatar
Thread Starter
Banned
iTrader: (1)
 
Joined: Mar 2007
Posts: 50
Likes: 0
From: Mt. Airy, MD / Charlotte, NC
Default

Originally Posted by 99camaromike
i will trade u 2005 trx 450r quad for it
No thanks man, I need the cash

Price drop to $3950 + shipping, needs to go NOW

Last edited by Snowboardr18; Apr 24, 2008 at 01:44 AM.
Old Apr 23, 2008 | 03:17 PM
  #18  
chevyz2801's Avatar
12 Second Club
iTrader: (20)
 
Joined: Nov 2006
Posts: 185
Likes: 0
From: Richmond VA
Default

if u want to sell some parts let me know
Old Apr 24, 2008 | 08:59 AM
  #19  
Snowboardr18's Avatar
Thread Starter
Banned
iTrader: (1)
 
Joined: Mar 2007
Posts: 50
Likes: 0
From: Mt. Airy, MD / Charlotte, NC
Default

Originally Posted by chevyz2801
if u want to sell some parts let me know
Will do.


Lets get this thing sold.
Old Apr 24, 2008 | 09:04 AM
  #20  
JosephIV's Avatar
TECH Enthusiast
iTrader: (14)
 
Joined: Mar 2008
Posts: 652
Likes: 12
From: Valley Lee, MD. Southern Maryland
Default

Ughhhh! Would've bought but am finishing garage walls and flooring the attic. Just sell it in 6 months when I'm ready again!!! Haha.



All times are GMT -5. The time now is 10:27 AM.