Trevor @ Texas Speed & Perf.

iTrader: (3)

That will come this winter, too. We've joked around about taking some 241's with us the same weekend we run for the heads/cam record again. We could bump the heads/cam record on Friday and set the cam-only record on Saturday. It will most likely happen on two different weekends, though. Either way, we're going go for the cam-only, too.

We have not set an exact date for when we'll head to San Antonio Raceway. When we know, we'll definitely post up so anyone that wants to see the car has an opportunity to do so.

We'll end up with 4.10's before we go for the heads/cam record again. It's buzzing 7500 through the traps, and that was in 2,000' DA! I expect it to buzz 7500 through the traps with 4.10's in good air. As Joseph said, we shift right at 7000.

Trevor

2003cobraH/C

iTrader: (1)

that is a sick setup!!! Mabe a F body for me?

tektrans

iTrader: (23)

That's Awesome!! You got a midget driving that car with that raceweight, haha?
Or are you using remote control?
GREAT JOB!!!!!!!!

-Joseph-

iTrader: (12)

Yea! It's Trevor!



mongoose_ss, we haven't made any plans yet, probably post in the TX forum when we make it down south.

nmass399

Wow i did not know u guys beat the record, thats the first car we looked at on thursday at memphis. I meant to get the car on video but i ended up racing my car lol. Congrats to everyone who had a part in the car and good luck at the cam only and beating your own 9.82(that's fast as hell for a n/a 346 on a stock bottom, BAD *** MAN)

Trevor @ Texas Speed & Perf.

iTrader: (3)

For the record, I'm 6' tall. Joseph and Jason were mad at me because I refused to fast a few days before the race.

casper383

iTrader: (8)

I'm from the centex area i would love to see this car in action! Post up when yall plan on goin to San Antonio!

LS1 SPEED

iTrader: (22)

congrats on the win and killer results

walker94z28

Congrats to all of the TSP guys. I had a blast and enjoyed meeting you guys finally. I can now put a name with a face. Great job guys.....

gnx7

iTrader: (28)

Congrats on getting in the 9's with such a basic combo. Your mph running an automatic is very impressive. Certainly a top end beast.

You mention a TH200 transmission. Is this a TH200-4R? What is it out of?

What is the intake manifold?

If you need a 145lb driver I'm available

Trevor @ Texas Speed & Perf.

iTrader: (3)

The TH200 does not have OD or lock-up vs. the 200-4R that does. The intake is a ported FAST 92mm, and we're running a PTM 95mm throttle body.

You're lighter than I am, but I'm not ready to give up my job yet.

smok'nZ

iTrader: (160)

wow how do you get down to 2800 with driver?

FiredUpZ28

oh its possible.... One article had a 94 Z28 Camaro down to 2900 or so with a decent amount of interior intact.

tektrans

iTrader: (23)

I wouldn't mind reading that article, got a link?

Sales2@Texas-speed

iTrader: (5)

It was 2858, and there's plenty of metal left to cut out if we wanted to get drastic. We haven't swiss cheesed anything under the body panels at all!

The Alchemist

iTrader: (19)

Are these the new cylinder heads you guys are supposed to come out with soon? Any eta on them?

Sales2@Texas-speed

iTrader: (5)

You got it! Hoping to start shipping them in time for Christmas!

camscam02

iTrader: (21)

can we get interior pics possibly?

The Alchemist

iTrader: (19)

Any more info on these heads??? I thought I remember seeing a thread during the summer about a new non factory casting you guys were introducing.

gator's 99TA

iTrader: (2)

any pictures of the car? other than track or bumper standing pictures.