new best MPH in the 1/8 and 1/4...
#1
Thread Starter
10 Second Club
iTrader: (2)
Joined: Apr 2006
Posts: 224
Likes: 0
From: North Carolina
new best MPH in the 1/8 and 1/4...
We went to the 1320X race at Rockingham this past weekend. The track wasn't all there for me. I was doing some testing on a set of 325-50-15 MT Dr's and couldn't get them to work to well.
1st Pass Sunday.
.021
1.810
6.70@114
9.95@142
2nd Pass Sunday
.018
1.89
6.86@113
10.20@139.9
After that I just hung it up. The track was getting worse...Oohh well. My 60ft are usally around 1.30-1.32 on a good track on slicks. This is in a 3600lbs+ car. I am hoping for some solid 9.3's-9.4's when I get it dialed in. This was my first outing with my Cold Fusion Direct port.
The car went 9.70@138 with a plate. I changed to a Cold Fusion Fogger with one of there stand alone kits! The car is pulling HARD on the topend!! Looking for 145-148mph when I get the car working and tuned in good!
1st Pass Sunday.
.021
1.810
6.70@114
9.95@142
2nd Pass Sunday
.018
1.89
6.86@113
10.20@139.9
After that I just hung it up. The track was getting worse...Oohh well. My 60ft are usally around 1.30-1.32 on a good track on slicks. This is in a 3600lbs+ car. I am hoping for some solid 9.3's-9.4's when I get it dialed in. This was my first outing with my Cold Fusion Direct port.
The car went 9.70@138 with a plate. I changed to a Cold Fusion Fogger with one of there stand alone kits! The car is pulling HARD on the topend!! Looking for 145-148mph when I get the car working and tuned in good!