1.38 60' in a 6mt supra?? who does that!?
#1
Teching In
Thread Starter
Join Date: Aug 2008
Location: Bemidji MN
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
1.38 60' in a 6mt supra?? who does that!?
well in this case i did lol. last fall i got a chance to try out my net set up. in the past i never did any better than a 1.8X 60' on 18'' dr's so i got myself some k sport drag coil overs and some 28'' slicks and back to the track i went. i only got 5 passes before i was kicked out (no cage) but i kept hitting it with more and more rpm off the 2 step and it just kept doing better. 1.6X, 1.5X, 1.4X then on the last try i got a 1.38
never was able to run more than base boost because of apparently a pinhole in one of the diaphragms of one of the wastage's. so 23 psi was all it would make.
here is a video. forgive my mediocre editing skills this was my first video ever.
never was able to run more than base boost because of apparently a pinhole in one of the diaphragms of one of the wastage's. so 23 psi was all it would make.
here is a video. forgive my mediocre editing skills this was my first video ever.
#5
9 Second Club
iTrader: (10)
Join Date: Apr 2009
Location: Joliet,IL and Las Vegas 50/50
Posts: 1,230
Likes: 0
Received 3 Likes
on
3 Posts
My buddy john has cut 1.3's with a 6speed supra. Not that uncommon considering there are tons of development in antilag and launch control in proefi that have really helped these platforms.
Trending Topics
#8
Old School Heavy
iTrader: (16)
That may be the first time I have seen a Supra make a clean pass. With that said, I think your rear shock settings are too loose. I would try to get the bounch out.
Also, while I appreciate any car that is getting it done at the track, This section is for LS specific accomplishments.
Also, while I appreciate any car that is getting it done at the track, This section is for LS specific accomplishments.