1994 camaro z502 project
#24
10 Second Club
iTrader: (10)
Jelly257: My cowl looks like yours does as well. I had originally cut something like LS135th's did but it was way to hard to reach everything. I test fit the motor and I knew right away most of it had to go. Did you chop the cowl all the way to the 90 degree bend into the fire wall?
Can you pull the distributor with the engine in the car?
Looks good,
~Jim~
Can you pull the distributor with the engine in the car?
Looks good,
~Jim~
#26
Teching In
Thread Starter
Join Date: Apr 2009
Location: camarillo ca
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
does any in cali know someone who does header work or sell a header that will fit my car beside leomns header i really dont want to speand 1500 on a set of header. thats my cage money right there
#28
Teching In
Thread Starter
Join Date: Apr 2009
Location: camarillo ca
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
got the header in not to much fitment problems used a set of hooker 2455s had to smash down #4 and # 7 tube to make fit cause they were hititng the k member but other wise took about 3 hours to install still have to deal with stearing but here some more pics
and still have about 4in ground clearance
and still have about 4in ground clearance
#30
Teching In
Thread Starter
Join Date: Apr 2009
Location: camarillo ca
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
started on the fuel system to day got the fuel tank out of the car and put my fittings in for the fuel line here pics
put -8an fitting in sould be good. ill post more when i finnsh the rest of the fuel system
put -8an fitting in sould be good. ill post more when i finnsh the rest of the fuel system
#37
Teching In
Thread Starter
Join Date: Apr 2009
Location: camarillo ca
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
yes u can get to the distributor.
I got the thing started up tonight about an hour ago. Almost done. Now its off to get caged. then you'll see it on the streets in the 805
all have the start up vid and finnish engine and wiring pic some time this week
I got the thing started up tonight about an hour ago. Almost done. Now its off to get caged. then you'll see it on the streets in the 805
all have the start up vid and finnish engine and wiring pic some time this week
#39
Teching In
Join Date: Mar 2007
Location: Sox side of chicago
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
Any advantage to using a motor plate? I see you used the mounts on the k member. Looks awesome I'm starting mine soon, did you use a manual steering rack and pinion?