Small Block & Big Block Chevy Specific Mouse & Rat Motor Discussion & Conversions

I.D. This Motor

Thread Tools
 
Search this Thread
 
Old 04-27-2009 | 05:21 PM
  #1  
PimpalaSS07's Avatar
Thread Starter
Teching In
 
Joined: Apr 2009
Posts: 8
Likes: 0
Default I.D. This Motor

Looking at this 1972 Chevelle, guy said the engine is a LT1 out of a Vette, asked him about the year and HP/TQ but he had no idea and stated the prior owned did all the work...can anyone help me out here with the year at HP/TQ of it...

THANKS !!
Attached Thumbnails I.D. This Motor-72chevelleblue_eng3.jpg  
Old 04-27-2009 | 06:53 PM
  #2  
12345678910's Avatar
On The Tree

 
Joined: Dec 2006
Posts: 108
Likes: 0
From: dayton,oh
Default

dont think its a lt1 cause of the manual fuel pump.
Old 04-27-2009 | 07:11 PM
  #3  
xx_ED_xx's Avatar
TECH Addict
iTrader: (17)
 
Joined: Jun 2007
Posts: 2,172
Likes: 0
Default

IT is probably the original LT-1. Kinda like ls6 and ls7 were big block chevies originally
Old 04-27-2009 | 09:00 PM
  #4  
cncbird's Avatar
On The Tree
iTrader: (3)
 
Joined: Feb 2004
Posts: 103
Likes: 0
From: Duncan, Oklahoma
Default

Originally Posted by PimpalaSS07
Looking at this 1972 Chevelle, guy said the engine is a LT1 out of a Vette, asked him about the year and HP/TQ but he had no idea and stated the prior owned did all the work...can anyone help me out here with the year at HP/TQ of it...

THANKS !!
Yea about 90% of people selling sbc's claim they are "vette" motors and about 1% really are. You need to check the # in front of the right head to see what it really is.
Old 04-29-2009 | 02:41 AM
  #5  
fbdy4life's Avatar
Staging Lane
 
Joined: Apr 2009
Posts: 50
Likes: 0
Default

ha spark plugs look too easy to get to for it to be an lt1. maybe early tpi.
Old 04-29-2009 | 10:33 AM
  #6  
victor3ranger's Avatar
On The Tree
 
Joined: Oct 2008
Posts: 178
Likes: 0
Default

Ed is right, could be a early 70-73 LT1. To be sure you would have to check all the numbers on the motor.
My 70RS/Z had a factory 370HP LT1 and it had factory solid lift cam.
Old 05-21-2009 | 01:46 AM
  #7  
camarodriver15's Avatar
Registered User
 
Joined: May 2009
Posts: 11
Likes: 0
From: park hills
Default

well it is a 70's motor because the dipstick is on the drivers side of that motor it appears because i dont see one on the pass side. if i do remember right the LT1 from the 70's had angled plug heads so is it is an LT1 someones changed the heads
Old 05-21-2009 | 11:46 AM
  #8  
SanitysBane's Avatar
Staging Lane
 
Joined: May 2007
Posts: 52
Likes: 0
From: Lubbock
Default

Good eye all LT1s had angle plug heads...I've got a set out in the shop actually...
Old 05-22-2009 | 03:08 AM
  #9  
ONEBAD383STROKER's Avatar
Staging Lane
iTrader: (5)
 
Joined: Apr 2007
Posts: 78
Likes: 0
From: Deep South Texas
Default

Im going to go out on a limb here and say its a small block chevy.

But seriously what are the numbers on the back of the block? What numbers are under the valve covers?




All times are GMT -5. The time now is 09:36 AM.