86 cutlass supreme
Thread Starter
Teching In
Joined: Mar 2009
Posts: 32
Likes: 0
From: Inland Empire - Los Angeles , California
86 cutlass supreme So i just brougt an 86 cutlass supreme for dirt cheap because someone couldnt pay their past due amount to the shop 
...Found out it has a 305 in it and we all kno thats not enough power for this heavy car...Sould i build the 305 or try something bigger...?
...Found out it has a 305 in it and we all kno thats not enough power for this heavy car...Sould i build the 305 or try something bigger...? 
Motor was 700$ for the 6.0(5.3 are cheaper of course, 400-500$), the intake new was 270$, the ignition box was 310$ and that was it, you can use manifolds and your stock trans and make more power for less with the 5.3 than a budget 350.
Nitrous is what i did when i had a 305. Otherwise, headers, intake, carb, all that might make more power, but you cannot tell. They just dont feel anywhere like you want without a cam and head swap. Some have made them run, but it is not cost efficient.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote Not possible, the 305 is not able to get a 4 inch bore. The crank is the same, it can be stroked to 335 cubes, that will make more power, but you might as well get a engine like the 5.7 that has more cubes as it is. Then stroke up to 383/396, whatever your heart desires.
