help please
Thread Starter
Teching In
Joined: Feb 2005
Posts: 1
Likes: 0
From: Indiana
help please Ok i have a 92Z28. I ordered headers for it from summit and i don't know if they'll work. I have a single cat and they say all the 92Z's had double. but one guy sends me headers for a 91tbi saying they will work with my set up.
Will they bolt up to the heads right. I know it's not na LS1 but I was just hoping you guys could help me on this. Thanks
Will they bolt up to the heads right. I know it's not na LS1 but I was just hoping you guys could help me on this. Thanks
Teching In
Joined: Oct 2003
Posts: 49
Likes: 0
From: Wichita, Kansas
My 92 Z28 (305 with auto) only had one cat also. I know the manual 305 Z's had dual cats. Not sure about the 350's though.
As far as the TBI headers being interchangeable with your 92 TPI, not sure.
Check out: http://www.thirdgen.org/ for some good info. You'll probably have better luck on their message board.
As far as the TBI headers being interchangeable with your 92 TPI, not sure.
Check out: http://www.thirdgen.org/ for some good info. You'll probably have better luck on their message board.
Last edited by Ron78Z&01SS; Feb 26, 2005 at 01:32 PM.
TECH Regular
Joined: Sep 2004
Posts: 408
Likes: 0
From: Deployed
Sorry dude kinda hard to understand your post, but the TPI and TBI headers are interchangable, they will bolt to your heads. Thats about all I can get from your post, I you need more help you can post again and be a little more specfic or check out Thirdgen.org
