Is this cam good enough?
Thread Starter
TECH Addict
iTrader: (13)
Joined: Sep 2004
Posts: 2,677
Likes: 0
From: arlington aka aggtown
Is this cam good enough? teh cam is a Hydraulic roller for my 69 nova car that will be a strip/ street car the cam is made by Crane the info on the cam is Duration@.050"int./exh. is 240'/248' and the lift is .558'/.558' 
this will be for a 420 sbc that will have a bottle on it as well as dart pro 1 230 cc aluminum heads that will be proted with a dart intake
if not this cam then what would u guys use and the motor will have 10.9 to 1 compression w/ 64cc heads
this will be for a 420 sbc that will have a bottle on it as well as dart pro 1 230 cc aluminum heads that will be proted with a dart intake
if not this cam then what would u guys use and the motor will have 10.9 to 1 compression w/ 64cc heads
a little more info....LSA,etc
i would be lookin for a custom cam tailored to the weight of the car and gears tires and the goals you want to achieve if i were you, theres a lot to lose or gain there
i would be lookin for a custom cam tailored to the weight of the car and gears tires and the goals you want to achieve if i were you, theres a lot to lose or gain there
