Anyone Else Having Problems Sealing...
Thread Starter
TECH Regular
Joined: Dec 2004
Posts: 492
Likes: 0
From: Newark, Ohio
Anyone Else Having Problems Sealing... Up their head studs??
I have anti-freeze in my spring area again, but on the other side of the motor!!!!
Oil is clear, just under the valve cover.
I have anti-freeze in my spring area again, but on the other side of the motor!!!!
Oil is clear, just under the valve cover.
Thread Starter
TECH Regular
Joined: Dec 2004
Posts: 492
Likes: 0
From: Newark, Ohio
Originally Posted by Muffracing
Do you have scerw in rocker studs? I had to use sealer on mine.
I had no problems until I switched to head studs. Same heads, then and now, last fall, it was on the pass. side , now its the drivers. And no I didn't swap heads, as the holes in front only allow me one way to install.
Could be the install of the studs. Did you leave it sit for a while after installing the studs and then torque the heads down later. This will make the already dry sealent crack and make for leaks.
