86RegalLT1

Is that possible? I was planning on using an electric water pump. I know that the bolt bosses in the cylinder head are the same, but I was wondering if the fuel pump casting boss would interfere with the accessory bracket on that side. I have a carb'ed LT1 in the car now and I want to just go back to a traditional SBC, but I don't want to ditch my accessories.


Thanks for any help...
-Garrett

hosspowerinc

iTrader: (22)

They all will work. You will either have to go with an electric fan or a reverse rotation mechanical fan for the reverse water pump.

vtec

iTrader: (1)

the LT1 accesory bracket will put your pullies too far back for your crank pulley. unless you can run an LT1 balancer on a sbc...

hosspowerinc

iTrader: (22)

You can. Everything will swap over.

TwoFast4Lv

iTrader: (8)

There are a few bolt holes missing but it bolts up