Another "What do you think it'll make?" thread
Thread Starter
TECH Enthusiast
iTrader: (16)
Joined: Jun 2004
Posts: 586
Likes: 0
From: Farmingville, New York
Another "What do you think it'll make?" thread Ok, what do ya think it'll make?
388 cubes, AFR 195's, Edelbrock Pro-Flo EFI w/ 30# injectors, approx. 9.7:1, Crower hydraulic roller .526 int. .547 exh. 226/236 on 114*lobe center with 1 7/8" headers. Not that it'll make much difference, but the rods are 6", pistons are KB (polished crowns), the combustion chambers and exhaust ports are ceramic coated and the valve stems and guides are dry film lubricant coated. Any guesses? Just curious what you all think. My guess is high 400's. 480 or so.
388 cubes, AFR 195's, Edelbrock Pro-Flo EFI w/ 30# injectors, approx. 9.7:1, Crower hydraulic roller .526 int. .547 exh. 226/236 on 114*lobe center with 1 7/8" headers. Not that it'll make much difference, but the rods are 6", pistons are KB (polished crowns), the combustion chambers and exhaust ports are ceramic coated and the valve stems and guides are dry film lubricant coated. Any guesses? Just curious what you all think. My guess is high 400's. 480 or so.
