View Poll Results: whats gonna be more reliable and more powerful??
single turbo 350
![](https://ls1tech.com/forums/images/polls/bar2-l.gif)
![](https://ls1tech.com/forums/images/polls/bar2.gif)
![](https://ls1tech.com/forums/images/polls/bar2-r.gif)
![](https://ls1tech.com/forums/clear.gif)
9
47.37%
built 383
![](https://ls1tech.com/forums/images/polls/bar3-l.gif)
![](https://ls1tech.com/forums/images/polls/bar3.gif)
![](https://ls1tech.com/forums/images/polls/bar3-r.gif)
![](https://ls1tech.com/forums/clear.gif)
10
52.63%
Voters: 19. You may not vote on this poll
i wanna go fast. tired of runnin 14s, help me out!
#21
Launching!
iTrader: (1)
Join Date: Aug 2005
Location: On top of your MOM!
Posts: 204
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
The RPM series heads work every well, the have a small hi volecity runner and are not bad bang for the buck. I did a 383 for a customer w/ ONLY 9.1 and used the Performer RPM flat tappet hyd package w/ an Air Gap intake. The engine runs on 87 octane and made 436hp at the crank and 488lbft all below 6000rpm. Its in a 4x4 and works KILLER, the torque comes off idle and stays flat until almost 5000rpm....
The power band will be slightly higher in a 350 because cubes will eat up duration.....
The power band will be slightly higher in a 350 because cubes will eat up duration.....
#22
Teching In
Join Date: Feb 2008
Location: Cleburne,Texas
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
http://www.dfwss.org/smf/index.php?topic=10253.0
http://www.dfwss.org/smf/index.php?topic=10297.0
http://www.dfwss.org/smf/index.php?topic=10178.0
Here are some heads and a xe274 cam would work
http://www.dfwss.org/smf/index.php?topic=10297.0
http://www.dfwss.org/smf/index.php?topic=10178.0
Here are some heads and a xe274 cam would work