Stolen From Heintz Racing: 2001 Haulmark Edge Trailer
#1
Closed ex-Sponsor Account
Thread Starter
Join Date: Mar 2010
Location: Mooresville, NC
Posts: 378
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Mooresville Area: Stolen last night from our parking lot was our 2001 Haulmark Edge 24 foot trailer.
It was stolen between 11:30PM on 7/9/11 and 10AM on 7/10/11. Both rear door locks were cut off, and the tongue lock was also cut off. These items along with the wheel chocks were all that were left in our parking lot. The trailers electrical plug has also been rewired (I guess whoever stole it did not have the correct plug, so they cut/stripped/and re-wired the plug in our parking lot.) Here are a few details about the trailer-
White in color
Checkerboard floor (Rear section by door has triangular tear on the floor)
Aluminum Wheels
Painted White Interior walls (Painted Plywood, not Sheet metal)
Has a side generator door.
Winch
Front wall has a strap track on it.
NC Plate BL75014 VIN 4XSGB24231G032324. Only thing different exterior wise is placement of the Edge decal on the front, it is in the center on the front panel, they were placed off to the side from the factory. If you have any information or see this trailer, please contact-
Heintz Racing @ 704-658-2302
Jeff Heintz @ 704-791-4663
Zach Grubb @ 704-798-8171 or
Don Dixon @ 336-314-0996
Any help will be greatly appreciated-
Zach
It was stolen between 11:30PM on 7/9/11 and 10AM on 7/10/11. Both rear door locks were cut off, and the tongue lock was also cut off. These items along with the wheel chocks were all that were left in our parking lot. The trailers electrical plug has also been rewired (I guess whoever stole it did not have the correct plug, so they cut/stripped/and re-wired the plug in our parking lot.) Here are a few details about the trailer-
White in color
Checkerboard floor (Rear section by door has triangular tear on the floor)
Aluminum Wheels
Painted White Interior walls (Painted Plywood, not Sheet metal)
Has a side generator door.
Winch
Front wall has a strap track on it.
NC Plate BL75014 VIN 4XSGB24231G032324. Only thing different exterior wise is placement of the Edge decal on the front, it is in the center on the front panel, they were placed off to the side from the factory. If you have any information or see this trailer, please contact-
Heintz Racing @ 704-658-2302
Jeff Heintz @ 704-791-4663
Zach Grubb @ 704-798-8171 or
Don Dixon @ 336-314-0996
Any help will be greatly appreciated-
Zach
Last edited by JHR Performance; 07-11-2011 at 08:23 AM.
#4
Closed ex-Sponsor Account
Thread Starter
Join Date: Mar 2010
Location: Mooresville, NC
Posts: 378
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Here are a few pictures. Notice the Edge Decal in the center on the front. They are usually on the drivers side top. Also from the rear, notice the painted white walls and teh tear right at the back on the floor.
![](http://i120.photobucket.com/albums/o179/zdgrubb/trailer1.jpg)
![](http://i120.photobucket.com/albums/o179/zdgrubb/trailer2.jpg)
Zach
We are also offering a $500 reward leading to the return or recovery of our trailer
![](http://i120.photobucket.com/albums/o179/zdgrubb/trailer1.jpg)
![](http://i120.photobucket.com/albums/o179/zdgrubb/trailer2.jpg)
Zach
We are also offering a $500 reward leading to the return or recovery of our trailer
#6
TECH Addict
iTrader: (9)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Dam sorry to hear. Alittle info to prevent it from happen again. Use washers on the locks , put them all the way up until you can just close the lock. My uncle showed me the trick. There is no way in hell u can cut it. He also put tabs on the inside of the rims so you can lock it to the axel. Alittle work but it pays in the end. Ill look out on craiglist and sleebay