Thanks to J Norris!
Thread Starter
11 Second Club
iTrader: (8)
Joined: Aug 2004
Posts: 503
Likes: 1
From: Under a hood in Alabama
Thanks to J Norris! John helped me out in a big way sat after me rear grenaded at MMP! 
He hooked me up with someone to help me out with a trailer and it was anthony the guy that runs the track!Thank you to him to! I was 200 miles away!Anyways if anyone ever gets a chance to meet him (J Norris) at a track do so he is a super cool guy & nice as can be! Thanks again! 
This guy can take some killer pic with his camera too I was impressed!
He hooked me up with someone to help me out with a trailer and it was anthony the guy that runs the track!Thank you to him to! I was 200 miles away!Anyways if anyone ever gets a chance to meet him (J Norris) at a track do so he is a super cool guy & nice as can be! Thanks again! This guy can take some killer pic with his camera too I was impressed! never met him...heard he got his *** cracked by a VIPER saturday 
http://incontt.com/videos/jnorrisMMP.wmv
http://incontt.com/videos/jnorrisMMP.wmv
Originally Posted by TA TECH
John helped me out in a big way sat after me rear grenaded at MMP! He hooked me up with someone to help me out with a trailer and it was anthony the guy that runs the track!Thank you to him to! I was 200 miles away!Anyways if anyone ever gets a chance to meet him (J Norris) at a track do so he is a super cool guy & nice as can be! Thanks again! This guy can take some killer pic with his camera too I was impressed!
He hooked me up with someone to help me out with a trailer and it was anthony the guy that runs the track!Thank you to him to! I was 200 miles away!Anyways if anyone ever gets a chance to meet him (J Norris) at a track do so he is a super cool guy & nice as can be! Thanks again! This guy can take some killer pic with his camera too I was impressed!Helping out was no problem, I am sure you would have done the same for me.
My wife, Teresa (amateur photographer) took those pictures.
Below is one of your car. I was by the wall for this picture and even though the picture does not show it your drivers tire was off the ground!
John
Last edited by JNorris; Oct 23, 2005 at 03:13 PM.
Thread Starter
11 Second Club
iTrader: (8)
Joined: Aug 2004
Posts: 503
Likes: 1
From: Under a hood in Alabama
Would have been both but guess he didn't get that shoot! That was a gentle lauch!To bad my rear went ya might have got to see my oil pan! 
Put some skinnies on it after a few practice runs wish he would have got some pics of that it looked sweet with the little fellas on the front!
ya might have got to see my oil pan! Put some skinnies on it after a few practice runs wish he would have got some pics of that it looked sweet with the little fellas on the front! Trending Topics
Originally Posted by TA TECH
John helped me out in a big way sat after me rear grenaded at MMP! He hooked me up with someone to help me out with a trailer and it was anthony the guy that runs the track!Thank you to him to! I was 200 miles away!Anyways if anyone ever gets a chance to meet him (J Norris) at a track do so he is a super cool guy & nice as can be! Thanks again! This guy can take some killer pic with his camera too I was impressed!
He hooked me up with someone to help me out with a trailer and it was anthony the guy that runs the track!Thank you to him to! I was 200 miles away!Anyways if anyone ever gets a chance to meet him (J Norris) at a track do so he is a super cool guy & nice as can be! Thanks again! This guy can take some killer pic with his camera too I was impressed!LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo Thread Starter
11 Second Club
iTrader: (8)
Joined: Aug 2004
Posts: 503
Likes: 1
From: Under a hood in Alabama
Just gots done checking it out the ring gear and pinion all are fine it just grenaded the posi all the locking teeth blew off just a smooth shaft now!dang factory torsen! Gots to get her back going! 
Gots to get her back going!
Originally Posted by TA TECH
Just gots done checking it out the ring gear and pinion all are fine it just grenaded the posi all the locking teeth blew off just a smooth shaft now!dang factory torsen! Gots to get her back going!
Gots to get her back going! 
Thread Starter
11 Second Club
iTrader: (8)
Joined: Aug 2004
Posts: 503
Likes: 1
From: Under a hood in Alabama
I'm getting prices on 3 different ones! Probably just stick a oem back in it it was pretty tough it would still be going if it wouldn't have done a violent tire hoop!When it come off the ground at a 6500 burn out unlock and when back on the ground relocked at 6500 rpm with tires already smoking hot just couldn't handle that rough hit!Boy that was some serious pavement they got at MMP!Might have her going by sat might not going to see what the dealer will let a unit go for in the morning!I think some of the locking teeth probably already had some wear on them from my previous probably 200 track runs and 60k miles of driving!And several 1.58-1.69 60 fts pulling the wheels! 
Originally Posted by TA TECH
I'm getting prices on 3 different ones! Probably just stick a oem back in it it was pretty tough it would still be going if it wouldn't have done a violent tire hoop!When it come off the ground at a 6500 burn out unlock and when back on the ground relocked at 6500 rpm with tires already smoking hot just couldn't handle that rough hit!Boy that was some serious pavement they got at MMP!Might have her going by sat might not going to see what the dealer will let a unit go for in the morning!I think some of the locking teeth probably already had some wear on them from my previous probably 200 track runs and 60k miles of driving!And several 1.58-1.69 60 fts pulling the wheels!
hell yeah that rear seemed strong lol hope you get it runnig soon. i think i have learned from you no drag radials for me now lol
Thread Starter
11 Second Club
iTrader: (8)
Joined: Aug 2004
Posts: 503
Likes: 1
From: Under a hood in Alabama
Na you would do fine I just ain't afraid too break something!I've took these cars apart bolt by bolt and could put'em back together blind folded!HA HA! 
Originally Posted by TA TECH
Na you would do fine I just ain't afraid too break something!I've took these cars apart bolt by bolt and could put'em back together blind folded!HA HA!
Thread Starter
11 Second Club
iTrader: (8)
Joined: Aug 2004
Posts: 503
Likes: 1
From: Under a hood in Alabama
Ya best with some nittos then ,hey the facory carrier is only $100 woopty do!Not alot of $$$$Ya just order over on the sponsor discout tire direct or sumtin like that!Where ai gots my last nittos!And there good on the street to!
Originally Posted by TA TECH
Ya best with some nittos then ,hey the facory carrier is only $100 woopty do!Not alot of $$$$Ya just order over on the sponsor discout tire direct or sumtin like that!Where ai gots my last nittos!And there good on the street to!
Thread Starter
11 Second Club
iTrader: (8)
Joined: Aug 2004
Posts: 503
Likes: 1
From: Under a hood in Alabama
Yeah those narrow a$$ tires are a pain to mount! One of the sponsors just told me the $100 diff he couldn't get no more crap!Guess I'll have to check with the little more expensive chev dealer or get a HD unit!
Originally Posted by TA TECH
Yeah those narrow a$$ tires are a pain to mount! One of the sponsors just told me the $100 diff he couldn't get no more crap!Guess I'll have to check with the little more expensive chev dealer or get a HD unit!
Originally Posted by cablebandit
never met him...heard he got his *** cracked by a VIPER saturday
http://incontt.com/videos/jnorrisMMP.wmv
http://incontt.com/videos/jnorrisMMP.wmv
I do not think so. You need to review the video!
Thanks for shooting the video and with the suspension help.
John