all ya gotta do is ask

 

Anyone wanna buy a cam for pretty cheap?

 

What's the specs and how much? May be interested in it

 

226/226 112LSA $125 bucks. I also have some hardened 7.4" pushrods at my parents that I'll throw in for a little extra money

 

Anyone here use SPEEDSOUTH in Pellham, AL?? if so how was their service?

 

Didn't they go under? I saw where they were selling off their inventory a while back. I go through FTPerformance in Gardendale. Their work always seems to be top notch.

 

considering trading my polished sypers for bigs and littles if interested https://ls1tech.com/forums/southern-...s-skinnys.html

 

Duno, they are running a dyno pull special in conjunction w/the hot rod power tour since its goes thru there on 6/10, three runs for $50...kinda why I was asking, if they also know how to tune ls1's?

 

I'm not sure, then. I know that Henson tunes LSx cars, as well as Walker. Both in the greater Bham area. Gomer is also local I believe. There are a ton of tuners in the Bham area, I'd check out one of the local boards and ask around.

 

I knew SpeedSouth had been sold but I hadn't heard anything about it going under.

 

I knew Robert (think that's his name) was selling off inventory. I assumed it went under. I saw the post on DMC a few months back.

This is Travis, btw.

 

Speedsouth is still open under new management. Prices have changed, but Jim still tunes all the cars up there.

 

Starting to look like ARS in here.

 

I think Robert kept a lot of the inventory as part of the sale. I remember Warren posting about it. I figured that was you after seeing the sig pic.

 

i may be interested. if you still got it.... is it the one in your car?

 

Yes, it was the cam that was in my car.

 

Oh god no. This is my safe haven for when i spend too much time on there. LMAO

 

im goin to 43 drag sat.is anyone else gonna go?t&t from 9am-3pm and 3 dyno pulls for $60.

 

Meh. I wasn't impressed with ARS =/

 

today at 43 dragway
dyno
1st pull 150 shot 441hp 549 tq
2nd pull motor 315hp 347tq
3rd pull motor 320hp 347 tq

i blew the exaust off one header on the n20 pull,i it got back on and hit the track.i couldnt hook for ****.
motor
2.0 60ft 8.40
1.9 60ft 8.40
n20
1.78 60ft 7.60
1.9 60ft ------blew the y pipe off the headers,drug it to the end of the track and put it back on
thats a lot of back pressure,ive got 3in y pipe&i pipe into a hooker muffler.
i guess i need a cutout or true duels.

how much power will the 9in with 35 spline axels and cromoly ds eat?just tryin to guess what i might have at the flywheel? i no stock 6 speed with 10 bolt is 16% loss.