arkansas dino day
#61
On The Tree
iTrader: (1)
Join Date: Nov 2006
Location: Benton, Arkansas
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
It is Seveir Street, and go back over the overpass. Then take a left towards the Benton Airport. Then you will come to a BP and Holland Chapel Church take a left down the road (I forget the name) the airport should be on the right. Go down about 3/4 of a mile and you will come to Jackman Street on the left. It is the building with Polk Performance on the door.
#62
11 Second Club
iTrader: (88)
I went there today and got my **** done.
A little advice, their machine is messing up, it can't pull Torque. They did a run on mine, and it spiked at 1200RWTQ..so yea that's not accurate.
Then they decided to plug some **** on the Car that they didn't end up needing, and I burned 2 Plug Wires on the drive back home cause they decided to rest them against the Header. So that got me a little heated on top of the fact that basically there is a bunch of disrespectful turds that work there, and they don't know how to treat customers and their ****. One of my friends cars got fucked up there also, he told me today.
Basically, you all watch your stuff, and check everything after..
A little advice, their machine is messing up, it can't pull Torque. They did a run on mine, and it spiked at 1200RWTQ..so yea that's not accurate.
Then they decided to plug some **** on the Car that they didn't end up needing, and I burned 2 Plug Wires on the drive back home cause they decided to rest them against the Header. So that got me a little heated on top of the fact that basically there is a bunch of disrespectful turds that work there, and they don't know how to treat customers and their ****. One of my friends cars got fucked up there also, he told me today.
Basically, you all watch your stuff, and check everything after..
#66
Trunion King
iTrader: (16)
If you're going to dyno at Polk... do your search... I have a friend that dynoed his car over there recently and he said that they messed up his dyno run and his plug wires. BTW, he has LT1 Z28 and he's a member here... The_Merv. He'll tell you more details of his fiasco w/ them.
#68
11 Second Club
iTrader: (88)
I had a bad experience with a couple of the people that worked there, not necessarily the Dyno itself. I understand that **** messes up, but when the wrong cables are connected in spots that they don't need to be, and plug wires get moved around and burned up to do it, you kinda get a little irritated. It's fixed and still rollin, so it all good.
As far as the people go, I almost had a good connection with them..
As far as the people go, I almost had a good connection with them..