Broken 12 bolt!
#21
Banned
iTrader: (92)
If I was keeping an f-body and I was doing a differential investment.... my only choice would be the Strange S60.
Have you seen the specs/mass on the parts? Plus they're set up for standard torque arm hook-ups, with more standard features, for the same price or less than most 12-bolts!
Have you seen the specs/mass on the parts? Plus they're set up for standard torque arm hook-ups, with more standard features, for the same price or less than most 12-bolts!
#24
TECH Apprentice
Thread Starter
iTrader: (4)
Join Date: Nov 2006
Location: Lawrenceville, GA
Posts: 329
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for all the information guys! I'll probably stick with the 12 bolt, but with better parts. I'll just have to get somebody who know's what the f**k there doing to set it up next time. Just hope it will stand up to the 6000rpm launch on the juice!!!!!!!!
#25
12 Second Club
iTrader: (4)
Join Date: Sep 2005
Location: NE Georgia
Posts: 321
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 2 fast 2000
Anybody on here ever broke a 12 bolt? I broke my moser 12 bolt about 2 weeks ago on just the heads a cam set up. Probably about 440 rwhp and 410 rwtq. It broke the carrier and ring and pinion. Who ever is reading this don't buy moser products, because they have the worst customer service in the buisness. Total dick heads! The rearend was set up from them and after it broke I took it apart and the passenger side carrier bearing was not pressed on and one of the bearings on the pinion was not pressed on. There blaming it on richmond gears, but the fact is they set this 12 bolt up so lose it came apart on me on my second pass on slicks. Now they are blowing me off and doing nothing about the rearend. There saying it's my fault because I own a 6 speed car. There saying that there 12 bolts are for street application's only, and if that was the case I could have saved myself $2700 and rolled the 10 bolt! Anybody else had a problem with there 12 bolt/ 6 speed car? I personaly think there feeding me a bunch of sh*t !
#26
11 Second Club
iTrader: (18)
Running a moser 12 bolt with 4.10's before i installed the rear end i took it to a shop and had them go through everything and recheck all the clearences, rear end is perfectly sound after 20 + passes and 15k miles. My brothers strange 12 bolt had the pinon nut come off and tore the gears up.
#27
Originally Posted by 2 fast 2000
Anybody on here ever broke a 12 bolt? I broke my moser 12 bolt about 2 weeks ago on just the heads a cam set up. Probably about 440 rwhp and 410 rwtq. It broke the carrier and ring and pinion. Who ever is reading this don't buy moser products, because they have the worst customer service in the buisness. Total dick heads! The rearend was set up from them and after it broke I took it apart and the passenger side carrier bearing was not pressed on and one of the bearings on the pinion was not pressed on. There blaming it on richmond gears, but the fact is they set this 12 bolt up so lose it came apart on me on my second pass on slicks. Now they are blowing me off and doing nothing about the rearend. There saying it's my fault because I own a 6 speed car. There saying that there 12 bolts are for street application's only, and if that was the case I could have saved myself $2700 and rolled the 10 bolt! Anybody else had a problem with there 12 bolt/ 6 speed car? I personaly think there feeding me a bunch of sh*t !
#32
TECH Apprentice
Thread Starter
iTrader: (4)
Join Date: Nov 2006
Location: Lawrenceville, GA
Posts: 329
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by paper doll
who did the rear end in your car to begin with?
#34
9 Second Club
iTrader: (25)
Join Date: Dec 2004
Location: Alabama
Posts: 496
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 2 fast 2000
Thanks for all the information guys! I'll probably stick with the 12 bolt, but with better parts. I'll just have to get somebody who know's what the f**k there doing to set it up next time. Just hope it will stand up to the 6000rpm launch on the juice!!!!!!!!
I have SEVERAL on mine... although i go threw will studs alot.... nothing like moving one inch at a race
#35
TECH Enthusiast
iTrader: (8)
Join Date: Oct 2004
Location: Half hour north of ATL
Posts: 548
Likes: 0
Received 0 Likes
on
0 Posts
I belive that your 12 Bolt is a total piece of garbage. Since it is trash and good for nothing I will be glad to come remove it out of your way for you- free of charge of course
#36
TECH Senior Member
iTrader: (42)
Originally Posted by BadAzz96Z28
I belive that your 12 Bolt is a total piece of garbage. Since it is trash and good for nothing I will be glad to come remove it out of your way for you- free of charge of course
Now that is a real humanitarian gesture in the spirit of the holiday season..
#37
TECH Apprentice
Thread Starter
iTrader: (4)
Join Date: Nov 2006
Location: Lawrenceville, GA
Posts: 329
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BadAzz96Z28
I belive that your 12 Bolt is a total piece of garbage. Since it is trash and good for nothing I will be glad to come remove it out of your way for you- free of charge of course
#40
TECH Enthusiast
Join Date: Dec 2006
Location: Powder Springs, GA
Posts: 564
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Ron@Vengeance
12 bolts are fine.. Its all in who sets them up... My Strange has been 9s in a 6spd a few times @ over 140mph...
On that note, I had a Moser back in the day.... Made a pass in front of GMMG grabbing 2nd/3rd... let off and all the sudden the car dropped about 6 inches on one side and my right rear tire came rolling past me.... Sheered every stud in the axle (Yes, the wheel was torqued
On that note, I had a Moser back in the day.... Made a pass in front of GMMG grabbing 2nd/3rd... let off and all the sudden the car dropped about 6 inches on one side and my right rear tire came rolling past me.... Sheered every stud in the axle (Yes, the wheel was torqued