F/S '02 3.42 rear, PST 3.5 inch Alum D/S
#1
Teching In
Thread Starter
iTrader: (2)
Join Date: Jun 2006
Location: Near Chattanooga, TN
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
F/S '02 3.42 rear, PST 3.5 inch Alum D/S
Swapping in a S-60 rear. Good stock 3.42 rear, complete (no calipers or rotors) $500.00 OBO. I honestly haven't driven the car with this rear in it, just bought the car minus engine and am swapping the S-60 in at the same time as installing a H/C LS-1. The rear is not leaking and spins over freely.
PST 3.5 inch aluminum driveshaft. Tested to 1200 H.P. cryo treated, finely balanced, lifetime breakage warranty. If you aren't familiar with this unit do a search of the forum, these things are well-respected. This thing costs $400.00 new, will sell for $265.00 shipped to your door. This unit has 3000 miles on it and is perfect. Has 1350 yokes, but you can easily buy a conversion u-joint to run it with a stock rear. Will fit 10 bolt, 12 bolt, and 9 inch rearends. I bought it from another forum user, but changed my rearend plans from 12 bolt to S-60 and none of my local shops could shorten an aluminum shaft. I am selling it because I bought a chromoly Strange shaft with the rear.
I am willing to ship the driveshaft, but would prefer local pickup (or I might drive 50 miles or so to meet someone with the rear). I live in the Chattanooga, TN area. I only get on this forum irregularly, so best way to contact me is to call me, leave message if you don't catch me
423-715-1517. Feel free to P.M. me, but give me a couple of days to respond.
PST 3.5 inch aluminum driveshaft. Tested to 1200 H.P. cryo treated, finely balanced, lifetime breakage warranty. If you aren't familiar with this unit do a search of the forum, these things are well-respected. This thing costs $400.00 new, will sell for $265.00 shipped to your door. This unit has 3000 miles on it and is perfect. Has 1350 yokes, but you can easily buy a conversion u-joint to run it with a stock rear. Will fit 10 bolt, 12 bolt, and 9 inch rearends. I bought it from another forum user, but changed my rearend plans from 12 bolt to S-60 and none of my local shops could shorten an aluminum shaft. I am selling it because I bought a chromoly Strange shaft with the rear.
I am willing to ship the driveshaft, but would prefer local pickup (or I might drive 50 miles or so to meet someone with the rear). I live in the Chattanooga, TN area. I only get on this forum irregularly, so best way to contact me is to call me, leave message if you don't catch me
423-715-1517. Feel free to P.M. me, but give me a couple of days to respond.