Any track result's from Reynold's
#21
10 Second Club
iTrader: (61)
Join Date: Dec 2004
Location: 20 Minutes North of ATL
Posts: 803
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by quicksilverado
Check out the 2nd round of pics Jerry linked to Matt. I got a couple of decent shots for ya.
![Driving](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_driving3.gif)
#23
10 Second Club
iTrader: (12)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by 00TurboT/A
Thanks Man.No I had BFG KDW II's ACTUAL street tires no drag radial. The track was really hooking early. I just kept waiting for you to show up yesterday. I think I wanted to see yours run more than mine ![The Jester](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_jest.gif)
![The Jester](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_jest.gif)
Thought that was you on 20, but wasn't sure.
I actually think it was good luck about the wheels. Evidently they've been cracking on the inboard side for awhile. Had I trailered the car home, I'd have never seen the cracks comeing through the outboaed side of the spokes. Was just enough more street time to finally crack through all the way.......
Could've been bad ugly at 130+
#27
10 Second Club
iTrader: (61)
Join Date: Dec 2004
Location: 20 Minutes North of ATL
Posts: 803
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by SLowETz
Yeah, I know.... that's what I meant.... some DR's and the ET will match the trap. That's Looooow 11's on a real tire.
Originally Posted by SLowETz
Thought that was you on 20, but wasn't sure. .
Originally Posted by SLowETz
Could've been bad ugly at 130+
#28
10 Second Club
iTrader: (12)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Yeah... it's real dumb loud in the car
Been lookin' hard at what's available in a drag rim. Not much out there that fits or that I like other than the Bogarts or the high end Weld's that only come in a 6" max back space.
Dunno at this point. Looks like mini tubs and a cut rear would open up a world of wheel choices but I'd be outa' commision for awhile
Gotta feeling that even if I go back to Bogarts it's gonna be a few weeks before I'm back in the seat.
It's ALWAYS sumptin'
![Cry](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_cry.gif)
Been lookin' hard at what's available in a drag rim. Not much out there that fits or that I like other than the Bogarts or the high end Weld's that only come in a 6" max back space.
Dunno at this point. Looks like mini tubs and a cut rear would open up a world of wheel choices but I'd be outa' commision for awhile
![Bang Head](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_banghead.gif)
Gotta feeling that even if I go back to Bogarts it's gonna be a few weeks before I'm back in the seat.
It's ALWAYS sumptin'
![Gruffy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_gruffy.gif)
#29
8 Second Club
iTrader: (34)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by SLowETz
Ron was sick as hell.... Mike's Dad was in town....
.....I had two BROKEN rear Bogarts![Bang Head](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_banghead.gif)
.....I had two BROKEN rear Bogarts
![Bang Head](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_banghead.gif)
Maybe talk to Steve and see if they can hook you up on a replacement pair at a better deal. Nothing wrong with a set of prostars for the time being if you have drag brakes on the rear - the 15x10 prostars are actually street legal wheels.
#31
10 Second Club
iTrader: (12)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by kp
Got any pics of that and which Bogarts were they? I'd like to see so I can look at mine, mine are some of the frst LS1 wheels they made.
Maybe talk to Steve and see if they can hook you up on a replacement pair at a better deal. Nothing wrong with a set of prostars for the time being if you have drag brakes on the rear - the 15x10 prostars are actually street legal wheels.
Maybe talk to Steve and see if they can hook you up on a replacement pair at a better deal. Nothing wrong with a set of prostars for the time being if you have drag brakes on the rear - the 15x10 prostars are actually street legal wheels.
![Bang Head](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_banghead.gif)
Cut the spacers off and prolly didn't do as good a job a I could have. Took a small air angle grinder w/a cut off wheel to the welds on the spacers and appears as though I created stress risers in the back of the rim for a place for the cracks to start.
![Bang Head](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_banghead.gif)
Thought I had them all smoothed down but apparently not.....
![Bang Head](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_banghead.gif)
Talked to Steve. He's sending out replacement centers. Gonna be about three weeks before I can get back in the seat.
![Bang Head](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_banghead.gif)
Expensive lesson learned.
![Bang Head](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_banghead.gif)
#32
8 Second Club
iTrader: (34)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I was thinking of cutting the spacers off on the fronts but I never got around to it, probbaly a good thing I didnt.
I have a extra set of 15x10 7.5 BS prostars with like new 28x11.5 QTPs/tubes/screws and if they fit you are more then welcome to use them. I ran 9.40s on the QTPs for a DOT race last summer and havent used them since. I am going to put slicks on the wheels for a spare set so you are more then welcome to borrow them and burn them up - just have to come up here and get them and get them back here when you are done
I have a extra set of 15x10 7.5 BS prostars with like new 28x11.5 QTPs/tubes/screws and if they fit you are more then welcome to use them. I ran 9.40s on the QTPs for a DOT race last summer and havent used them since. I am going to put slicks on the wheels for a spare set so you are more then welcome to borrow them and burn them up - just have to come up here and get them and get them back here when you are done
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
#33
10 Second Club
iTrader: (12)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Damn Kevin.... that's one hell of a kind offer, and I do appreciate it! Thanx bud.
I think what I probably "should" do is take advantage of the down time and paint the inside /outside of the house..... pressure wash the driveway..... finish clearing out the back lot..... and build the shed in the back..... while I've have time.
.....just like I old Momma I would(didn't "really" think I'd get to it anyway once the car got back from Vengeance
).
They just don't seem to do much painting at the track![The Jester](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_jest.gif)
Thanx again!![Cheers!!](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_cheers.gif)
Oh yeah.... in talking to Steve @ SJM today, he said there would be no comprimize in structural integrity of the wheels w/out the spacers as long as you don't nick/cut into the wheel surface leaving a stress riser or "control joint" for a place for a crack to begin/form.
I think what I probably "should" do is take advantage of the down time and paint the inside /outside of the house..... pressure wash the driveway..... finish clearing out the back lot..... and build the shed in the back..... while I've have time.
![Bang Head](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_banghead.gif)
.....just like I old Momma I would(didn't "really" think I'd get to it anyway once the car got back from Vengeance
![Biggrinangel](https://ls1tech.com/forums/images/smilies2/biggrinangel.gif)
They just don't seem to do much painting at the track
![The Jester](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_jest.gif)
Thanx again!
![Cheers!!](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_cheers.gif)
Oh yeah.... in talking to Steve @ SJM today, he said there would be no comprimize in structural integrity of the wheels w/out the spacers as long as you don't nick/cut into the wheel surface leaving a stress riser or "control joint" for a place for a crack to begin/form.
#39
10 Second Club
iTrader: (45)
Join Date: Sep 2004
Location: Richmond Hill, GA
Posts: 611
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by b1er
And you killed me in eliminations.....Nice run..... ![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)