BadA$$98Z28

iTrader: (1)

What are these free mods everyone talks about and how do i do them?

URSLOW2

iTrader: (5)

Type in Free Mods and Read Read Read

bene

iTrader: (16)

Install university is the key!

Free mods:

!EGR, Port/Polish throttle body, by pass throttle body, Free Ram Air, Port MAF ends ( I would suggest that you leave this alone though), descreened MAF.

Just for giggles, !girlfriend or !wife. Its good weight reduction! (My wife reads my posts so yeah, I'm kidding of course.)

99Hawk262

iTrader: (19)

the_merv

iTrader: (88)

Then she will !Bene from the bedroom for a while..

blue98Z

iTrader: (29)

BadA$$98Z28

iTrader: (1)

ok, how do i do them?

bene

iTrader: (16)

Here is the link for you man.
LS1 free mods

There alot of how to's.

99ngc00

iTrader: (2)

they are all pretty easy to do also

BadA$$98Z28

iTrader: (1)

my MAF is stuck in my air lid, any tips on how to get it out?

ThaBirdMan

iTrader: (15)

A big flathead


Or alot of wiggling. G/L

bene

iTrader: (16)

If you need any help just holler one of us out and will help you dude.

the_merv

iTrader: (88)

Yea..half of the guys here from the area live on Base..

the_merv

iTrader: (88)

Here are some for ya..I posted this to some newb in the LT1 section a while back..

There is the Blinker Fluid mod, you get rid of the extra Resivoir that it comes with from the Factory, and it drops 20 lbs. You change out the Exhaust Bearings and that will get you about .10 in the quarter. There is a couple more, I forgot what they were..

slt200mph

iTrader: (42)

Don't forget about the phuchin flux capasitor extention flange ...

02402RAMAIR

iTrader: (8)

you can put grease on the brake rotors. cuts down on pad to rotor friction.
less drag.

XxWs6MaNxX

iTrader: (2)