GAFBA Fall Shootout Sunday 9/23/07
#43
TECH Regular
iTrader: (4)
Join Date: Jun 2005
Location: Marietta, GA
Posts: 408
Likes: 0
Received 0 Likes
on
0 Posts
Ron, What regulator are you running? Alot of folks have had issues with aermototive regulators when the vacuum reference line is hooked up. I, and many others, do not use the reference line and just tune it for a constant fuel pressure.
I dont know details of your setup, but i think most have trouble with them on FI setups
I dont know details of your setup, but i think most have trouble with them on FI setups
#48
9 Second Club
iTrader: (24)
What the hell Jerry! I had some issue's also , but after I installed a new altenator and charged my new battery up for a few minute's and cleaned up some ground wire connection's and new o2 sensor's,with new plug's she seem's to be running pretty good. I need some new plug wire's also, so I guess I will stop by summit in the morning on the way down!
#49
9 Second Club
iTrader: (24)
Originally Posted by Ron@Vengeance
Not sure if Ill be racing or not... Fuel pressure is going to **** @ 4k rpms..... Doing some break in pulls on the chassis dyno and working on this FP issue today. If it gets sorted out Ill be there.
#52
TECH Fanatic
iTrader: (3)
Wow is my car a PIG 3870 with me in it. Traction on Nitto's at the track is....aaahhh...not good. Best I could manage was a 12.30 @ 119. All and all (and I'm certainly no drag racer) I thought the track with slick. Had a good time though. Thanks to all who put this together!!
#56
10 Second Club
iTrader: (61)
Join Date: Dec 2004
Location: 20 Minutes North of ATL
Posts: 803
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by HUNTER02SS
It was fun!! My best was a 10.79@143.31 with a 2.19 60ft.!
#59
TECH Regular
iTrader: (4)
Join Date: Jun 2005
Location: Marietta, GA
Posts: 408
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by HUNTER02SS
It was fun!! My best was a 10.79@143.31 with a 2.19 60ft.!
I got my motor running today about 11:30am with the intention of coming down there, but i still have some issues with coolant in my valve cover breather catch can...no blown head gasket like before, cause it actually runs...but something is goin on...so, needless to say i couldnt make it, maybe next time.
#60
10 Second Club
iTrader: (3)
Join Date: Nov 2002
Location: Lubbock,TX
Posts: 542
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by kp
143 is rollin, I take it you were not on very good tires..