Whoever is looking for CHEAP install rates on their LSX vehicles, come talk to me..
#25
i will be tuning my own via hp tuners... i am NOT a sponsor, and am NOT looking to make money, but if you want to buy the credits(like 99 bucks for 2 credits i think?) ill help tune your car.
i think im gonna go with the Real time tuning for 6 credits, then ill have 2 left. i know i mentioned to 02ls1formula about possibly using the 2, which is why i said you would need to purchase 2 credits. im also getting me a wideband for tuning as well.
i think im gonna go with the Real time tuning for 6 credits, then ill have 2 left. i know i mentioned to 02ls1formula about possibly using the 2, which is why i said you would need to purchase 2 credits. im also getting me a wideband for tuning as well.
#29
just buy the credits and some lunch for me and you can use it whenever you want/need to tune it!
i highly recommend a wideband. there is a group purchase going on right now for one for like 225 shipped with a guage. get that one. im going to order mine probably tomorrow or so.
no need to spend 640 on hp tuners when you can spend 100(i think thats how much 2 credits cost?) and tune it whenever!
i live in buckhead, so im pretty close to most metro areas.
#34
Banned
iTrader: (92)
just buy the credits and some lunch for me and you can use it whenever you want/need to tune it!
no need to spend 640 on hp tuners when you can spend 100(i think thats how much 2 credits cost?) and tune it whenever!
i live in buckhead, so im pretty close to most metro areas.
no need to spend 640 on hp tuners when you can spend 100(i think thats how much 2 credits cost?) and tune it whenever!
i live in buckhead, so im pretty close to most metro areas.
I've already got a FAST intake and some heads, I need to get the cam/headers and I'm ready for the install.
Damian, I still need your phone number, seriously, I'd like to send you some biznazzzzz
#36
np man, now i just gotta get me a new laptop cause some ******** contractor stole mine! after that, should be good to go. hptuners should be getting here this week. i ordered it last week. just shoot me a pm when you're ready. weekends are really the only time i could do it. you have a wideband?
#37
Banned
iTrader: (92)
Sorry Damian, this will be my last off-topic post.
I got the intake for free! It's the 78mm version -brand new in the box! A tech at work got a whole garage full of stuff from a old GM sponsored racer that's been getting pretty sick. He doesn't need the FAST manifold so I got it at no charge!
I've already got a Shaner S3 throttle body on the car now. I plan to grind off the FAST logo and sand/paint/clearcoat. I can't stand the looks of a bare FAST manifold. Ugly.
The heads are from TSP. A new set (CNC'd) for only $550!
My buddy ordered a set (one was lost during shipping on my buddy's order) so they sent him a new set, but never asked for the other (single) one back. He's going to trade the one CNC'd head for my factory 243 castings when I do the swap. I still need to order the other head, the CNC'd one is on my shelf in my office as decoration.
I'm waiting for a set of headers to come along on a C5 that we get.... so I can swap it for my stock stuff. That's when I'll order my custom cam and buy the other head.
So I get a new H/C/I set up for an investment of $850 give or take.
I got the intake for free! It's the 78mm version -brand new in the box! A tech at work got a whole garage full of stuff from a old GM sponsored racer that's been getting pretty sick. He doesn't need the FAST manifold so I got it at no charge!
I've already got a Shaner S3 throttle body on the car now. I plan to grind off the FAST logo and sand/paint/clearcoat. I can't stand the looks of a bare FAST manifold. Ugly.
The heads are from TSP. A new set (CNC'd) for only $550!
My buddy ordered a set (one was lost during shipping on my buddy's order) so they sent him a new set, but never asked for the other (single) one back. He's going to trade the one CNC'd head for my factory 243 castings when I do the swap. I still need to order the other head, the CNC'd one is on my shelf in my office as decoration.
I'm waiting for a set of headers to come along on a C5 that we get.... so I can swap it for my stock stuff. That's when I'll order my custom cam and buy the other head.
So I get a new H/C/I set up for an investment of $850 give or take.