lnuxhakr

iTrader: (2)

I have the following up for sale or I will trade ALL of it (see below)

Ask as many questions as you would like. My son has outgrown this stuff and moved on to IPSC so we need to get it out of the house.

Summary:

Cars:
(1) Traxxas Nitro 4 Tec 2.5 - Complete with remote and running - $200.00 OBO
(1) HPI R-40 - Complete with remote and running - $300.00

4WD Buggy
(1) Kyosho Inferno - Rolling chassis and electronics but motor needs a rebuild - $150.00

Engines
(1) OS .12 - Runs great - $50.00
(1) Mach .15 - Needs a rebuild only - $25.00
(1) Hyper.25 - Needs rebuild only - $25.00

Remote
(1)Futaba 4 Channel Remote - $75.00


Specifics:

(1) Traxxas Nitro 4 Tec 2.5 - http://youtube.com/watch?v=2wNGywub7rw

60+mph top speed
TRX® 2.5 Racing Engine
Three-belt all-wheel drive system
Adjustable two-speed auto-shifting transmission
200mm wide
Very-low center of gravity (CG)
Fuel tank is mounted at the center of gravity
2.0-inch nylon mesh wheels (bright, aluminum finish)
Pre-glued racing tires with contoured inserts
Full ball bearings
Reactive caster capability and adjustable caster angle
Full turnbuckles
Adjustable ride height
Tuned exhaust pipe
Fully-countersunk aluminum chassis
Engine and engine mount are a structural part of the chassis
Front upper and lower suspension arms
Bellcrank steering system
Planetary gear differentials with bearing supported shafts
Optional ball differentials, gearsets, graphite chassis, aluminum pulleys, and sway bars, with sliding adjustable sway bar mounts.


(1) HPI R-40 - http://youtube.com/watch?v=0OwdyLCg-7c

HPI .12 Engine and Traxxas Electronics
3mm purple anodized aluminum chassis
2.5mm woven graphite upper deck
Multiring HPI Pro Foam Tires included (26mm front, 30mm rear)
Convenient adjustment clips for suspension settings - no setting board needed
Threaded composite shock absorbers
Aluminum shock towers
Impact-absorbing front upper arm bushing
Highly reliable 3-belt drive
Full ball bearings in drivetrain for maximum efficiency
Center Force Clutch allows subtle clutch adjustments
Threaded clutchbell for ease of changing 1st/2nd speed gears
Shoe-Type 2 Speed for smooth shifting from 1st to 2nd gear
Vented steel disc brake with replaceable brake pads
Side belt tensioner with ball bearings
Bellcrank steering with aluminum steering plate
Front/rear universal dogbones
Sealed receiver compartment
Sealed front/rear gear diffs
Strong front crash bumper with urethane foam bumper
Fuel tank held in place by body clips
Adjustable body post caps
Front body post brace
Convenient carrying handle

(1) Kyosho Inferno 4WD - http://youtube.com/watch?v=hGtZWFMk77o

(1)Futaba 4 Channel Remote - $75.00

Transmitter T4YF :
2 Stick system,4 channels
Transmitting frequencies: FM40

Receiver R136F :
6 channels, FM receiver
Receiving frequencies FM40
Intermediate frequencies : 455KHz
Power requirement: 6.0V (penlight battery X4) or 4.8V nicd battery (common with servo)
Current drain: 9.5mA
Size: 33.4x50.7X18.1mm
Weight: 27.8g

Servo:
(Standard Servo)
Power requirement: 4.8V or6V (common with receiver)
Current drain: 8mA (at 6V)
Output torque: 3.2kg-cm at 4.8V
Output torque: 4.1kg-cm at 6V
Operating speed: 0.23sec/60 degree at 4.8V
Operating speed: 0.19sec/60 degree at 6V
Size: 40.4x19.8x36mm
Weight: 37.2g


All 3 cars, remotes and engines



HPI R40



Traxxas Nitro 4 Tec



Kyosho Inferno 4WD



Futaba Remote



OS .12 Engine



Mach .15 Engine



Hyper .25 Engine




Possible trades:

9mm
.380
12 gauge

Cash

PM me with offers...you never know!