01ssreda4

iTrader: (96)

no remember i dont like sticks. too much like holding a pecker in your hand......so thats why yall bought six speeds.

taws6m6

iTrader: (37)

doesnt matter what i am in. Its still enough to wax that ***..And i dont know what time i run, cause i ran it when i really shouldnt have. At least i go and actually run my car, i dont sit at the house and speculate

01ssreda4

iTrader: (96)

somebody once told me not to EVER kill a retarded kids dream. so yes chris you would surely win any race you have.

w02ramair

iTrader: (3)

40 DEGREES...Sun Rise Maryland....Nitto's..I couldn't keep them hot and sticky enough..i tried freakin roasted those suckers in 2nd gear...to no avenge...

This last weekend I do burnout...pull up..no ******* CLUTCH..wtf...so sometime this week I want to put another slave and master in...but gotta find the time or place..if I can get a lift I can do it in under 2 hours...pull trans and parts and put back down...

I have some wrap for the line too so to keep it from getting hot from the QTP's. And I'm gonna do the drill mod...AGAIN..this time bigger bit.

01ssreda4

iTrader: (96)

auto doesn't have all those problems......i hear performabuilt has good deals going on right now.

taws6m6

iTrader: (37)

You're right the auto doesnt. It just starts slipping its *** off when you throw any kind of real power thru it.

Hilton

iTrader: (36)

Careful doing that drill mod bigger. Mine started leaking where the drill bit nicked the rubber inside the braided hose. I ended up taking the line to Bearing Service and asking them to remove the end, cut a piece off, and put it back on. Solved the problem pretty cheap. They don't sell just that line by the way, so don't **** it up.

That was a good video by the way. I don't know what song it was though.

Hilton

iTrader: (36)

... oh, also get one of those "remote bleeders" from that guy on here selling them. Makes bleeding the clutch a breeze.

Might as well if you're replacing the slave anyway.

w02ramair

iTrader: (3)

Auto Can kiss my but..i just spent a lot of money on this damn T56 having it built so as to not break no matter what I throw at it..lol now just need to get the hydraulics issue handled..which Ishould have done to begine with but I was short on time In Tucson when I was putting it all back in. Had to be at work the following week and spent a week there.

w02ramair

iTrader: (3)

I have the keliente mod on my floorboard...makes bleeding a breeze..I just couldn't get another slave when i put it all back together and I knew the old slave was bad but just had a small leak but I was 1200 miles from home with the car and had to do what I had to do to get it home.

taws6m6

iTrader: (37)

coming to the track fri or next steve?

01ssreda4

iTrader: (96)

sure y not. if it will shut you up

w02ramair

iTrader: (3)

haha well humm...

taws6m6

iTrader: (37)

How would it shut me up? I am not the one with something to prove. And why would i shut up? I wasnt the one that started the trash talk to begin with. You might want to spray the 10lbs of dirt of the motor before hand.

01ssreda4

iTrader: (96)

good idea.....my car is still prettier on the outside

taws6m6

iTrader: (37)

oooooo, ouch. Hey you know what? My dads car is faster than yours!! Maybe that'll knock off a few more tenths in the 60ft??? Shiat, b cuttin 1.4's n dat bitch b4 u no it yo!!! Pretty doesnt count at the track. And "pretty" isnt a word i would throw around too much or use to describe a camaro or a t/a. Who cares the sheet metal looks good when the motor looks like it fell of the back of a truck? I am thru with your immature nonsense. You just bounce from one topic to the next. Its like trying to argue with female. You cant come up with any valid reasoning for your arguments, so you bounce to the next topic till you find something else you think you can validate. Go to the track, and post up some times.

blue98Z

iTrader: (29)

Remember now, this is supposed to be friendly. Let's try not to get this locked like them boys from arkansas always do with their threads. No offense to Greg or a few other's from there, but they know who I'm talking about with their threads.

caddobass

iTrader: (1)

Hey Josh, we never could work out a outlaw class with EFI Racing & no offense to anyone. I'm full up with reading so much trash talk that I'm going to run a Grudge Race at all of our EFI Races. This will show all the ark la tex who the big dog is or who will hide under the porch. So all you trash talkers "put up or shut up".

Hilton

iTrader: (36)

I'll run with y'all.

"Come on 13's!" The Sedated Snail will rise again!

I don't think Steve (01redSS) means any harm. He's just giving a "ribbing" like friends do to each other. Just shrug that **** off.

I talk more **** about my car than the rest of you do combined.

taws6m6

iTrader: (37)

I am kinda exhausted from talking all the ****. I aint mad at steve, autos have there strong points and so do mauals. He knows i love him