1993-2002 F-Body Splitters Group Purchase SAVE $100!!!
all fixed
03-07-2009, 03:01 PM
#24
Man, that looks AWESOME with the red and black theme 
In this pic though...
It looks like it pulls up just before the center three bolts. I am thinking I didn't send you a long enough spacer for the front FACTORY mounting spots.
Loosen it and if it levels it out let me know (and let me know how much you loosened it, 1/4", etc...) and I'll send you new spacers for them (or you can grab them at a local hardware store, they are nylon spacers, usually $.50...).
Although, it could just be that pic because it looks level in the others...
That red and black with the splitter just makes it look aggressive, modern and a little higher end IMHO
In this pic though...
It looks like it pulls up just before the center three bolts. I am thinking I didn't send you a long enough spacer for the front FACTORY mounting spots.
Loosen it and if it levels it out let me know (and let me know how much you loosened it, 1/4", etc...) and I'll send you new spacers for them (or you can grab them at a local hardware store, they are nylon spacers, usually $.50...).
Although, it could just be that pic because it looks level in the others...
That red and black with the splitter just makes it look aggressive, modern and a little higher end IMHO
03-07-2009, 08:50 PM
#25
12 Second Club
iTrader: (8)
Join Date: Feb 2004
Location: Fawn Twp, PA
Posts: 497
Likes: 0
Received 0 Likes
on
0 Posts
it definitely is bent upward a bit. i tried loosening bolts but i believe it may be from shipping. when it was delivered the splitter was standing tall against my porch wall and had a slight bend at the bottom, i am hoping it will settle on its own. any ideas? i stuffed a few washers between the lip and splitter and got it straighter but they will fall out when i drive.
03-13-2009, 04:03 PM
#30
I just extended to offer 
We already had our 10 and they all shipped but I am offering it again since I got requests as people were getting their tax returns back 
I have to ask everyone who paypals though to add the 3% because my profit is just too low... It is all written in the original post.
Basically, you can mail a check or money order for $250 or paypal madelisle@yahoo.com $258 (that is the quickest route, turn around is 1-5 days max)...
Thanks
!
We already had our 10 and they all shipped but I am offering it again since I got requests as people were getting their tax returns back I have to ask everyone who paypals though to add the 3% because my profit is just too low... It is all written in the original post.
Basically, you can mail a check or money order for $250 or paypal madelisle@yahoo.com $258 (that is the quickest route, turn around is 1-5 days max)...
Thanks
! 
Got my tax return today..................just sent payment
03-13-2009, 08:32 PM
#32
Are you close to Bloomsburg at all?
03-13-2009, 10:13 PM
#34
^^Yes it will. It attaches using the the 8 factory holes in the bumper (that the underneath black plastic splash guard thing attaches with) and then three holes you drill into the bumper itself...
It just splits the air, doesn't scoop the air, so there is no added pressure to the bumper. By splitting the air, it speeds the air up UNDER the car causing downforce on TOP of the WHOLE car... Here's my lame/joke video explanation:
http://www.youtube.com/watch?v=Xk15OKB7qAs
It just splits the air, doesn't scoop the air, so there is no added pressure to the bumper. By splitting the air, it speeds the air up UNDER the car causing downforce on TOP of the WHOLE car... Here's my lame/joke video explanation:
http://www.youtube.com/watch?v=Xk15OKB7qAs
03-14-2009, 01:32 AM
#35
Launching!
iTrader: (2)
Join Date: May 2007
Location: Camp Hill, Pa
Posts: 270
Likes: 0
Received 0 Likes
on
0 Posts
I remember cruising around PA with the wife's family and seeing a 4th gen and thinking, "Man, it would be so f@cking cool if one day, across the country, I just happen to see my products cruising around on a car..." Maybe I'll have my day
Are you close to Bloomsburg at all?
Are you close to Bloomsburg at all?
I'll be at the GM Nationals in June in Carlisle, Pa (http://www.carsatcarlisle.com/ce/events/gm-nationals/) so I'm sure the splitter wil get alot of attention.....too bad I didn't have it when they did the spread on my SS in GM High Tech Performance magazine
03-14-2009, 11:40 AM
#37
Launching!
iTrader: (2)
Join Date: May 2007
Location: Camp Hill, Pa
Posts: 270
Likes: 0
Received 0 Likes
on
0 Posts
Enola..............I used to live in Laurel Hills North until I moved to Cramp, err I
mean Camp Hill a few years ago.
Don't know if I've seen you driving in the area, what color is your Z?
mean Camp Hill a few years ago.
Don't know if I've seen you driving in the area, what color is your Z?
03-16-2009, 07:21 AM
#38
12 Second Club
Join Date: Dec 2004
Location: Harrisburg PA
Posts: 175
Likes: 0
Received 0 Likes
on
0 Posts
its black with chrome z06 wheels
i moved out of enola about a year ago, live in highspire now but i guess i didnt update my profile.....still its only 10-15 miles of difference
i moved out of enola about a year ago, live in highspire now but i guess i didnt update my profile.....still its only 10-15 miles of difference
03-19-2009, 06:03 PM
#39
TECH Apprentice
iTrader: (2)
Join Date: May 2007
Location: Redding, CA
Posts: 304
Likes: 0
Received 0 Likes
on
0 Posts
So would your splitter work on a nose setup like my car? How do you think it would work and look, I could use something that would keep the paint on my nose, since it isn't there so much any longer. 
03-19-2009, 07:08 PM
#40