FS: PowerStop Zinc Plated Blank Rotors and Brake Pads!
04-08-2009, 04:19 PM
#1
FormerVendor
Thread Starter
iTrader: (73)
Join Date: Jan 2009
Location: Chicago
Posts: 1,731
Likes: 0
Received 0 Likes
on
0 Posts
FS: PowerStop Zinc Plated Blank Rotors and Brake Pads! PLEASE NOTE AS OF 5/20 NEW CONTACT NUMBER IS 855-556-8103
Hey again LS1Tech members, our last blow out sale was a huge success here, during that time I received a number of requests for Zinc plated blank rotors. I spoke with PowerStop and ordered a large number of blanks to offer to the LS1 community. These are high quality castings coated for corrosion resistance.
**All the following prices are for 4 rotors (front and rear) and your choice of PowerStop Z16 Ceramic or PM18 Metallic Pads**
++ Shipping to the Lower 48 states is Free! ++
*NEW* 1993-1997 F-Body -- $184.99 4 Sets Left!
1998-2002 F-Body -- $199.99 3 Sets Left!
1997-2004 C5 Corvette -- $209.99 3 Sets Left!
C5 Front w\ F-Body Rear -- Please Call
*****Break in How To*****
Perform 5 aggressive stops from 50 mph to 10 mph without letting the brakes cool and try not to come to a complete stop. Then do 5 moderate stops at 30 mph to 5 mph and do not let the rotors cool after each brake application. You should expect to smell some burning resin. Finally, drive around a little and let the brakes cool down. This assures proper friction deposition to prevent brake pulsation.
The key is to get an even coat of resin on the rotors, therefore you should avoid coming to a complete stop at all costs until they have cooled. Obviously doing that in the city may be difficult, a backroad with little traffic is best suited for the break in process. Of course, safety first!
If you have any questions about the product please feel free to give me a call at 855.556.8103 between the hours of 8am and 5:00pm central time or shoot me a PM and I will be glad to help.
Hey again LS1Tech members, our last blow out sale was a huge success here, during that time I received a number of requests for Zinc plated blank rotors. I spoke with PowerStop and ordered a large number of blanks to offer to the LS1 community. These are high quality castings coated for corrosion resistance.
**All the following prices are for 4 rotors (front and rear) and your choice of PowerStop Z16 Ceramic or PM18 Metallic Pads**
++ Shipping to the Lower 48 states is Free! ++
*NEW* 1993-1997 F-Body -- $184.99 4 Sets Left!
1998-2002 F-Body -- $199.99 3 Sets Left!
1997-2004 C5 Corvette -- $209.99 3 Sets Left!
C5 Front w\ F-Body Rear -- Please Call
*****Break in How To*****
Perform 5 aggressive stops from 50 mph to 10 mph without letting the brakes cool and try not to come to a complete stop. Then do 5 moderate stops at 30 mph to 5 mph and do not let the rotors cool after each brake application. You should expect to smell some burning resin. Finally, drive around a little and let the brakes cool down. This assures proper friction deposition to prevent brake pulsation.
The key is to get an even coat of resin on the rotors, therefore you should avoid coming to a complete stop at all costs until they have cooled. Obviously doing that in the city may be difficult, a backroad with little traffic is best suited for the break in process. Of course, safety first!
If you have any questions about the product please feel free to give me a call at 855.556.8103 between the hours of 8am and 5:00pm central time or shoot me a PM and I will be glad to help.
Last edited by Brakemotive; 05-12-2011 at 02:40 PM.
04-09-2009, 04:36 PM
#5
FormerVendor
Thread Starter
iTrader: (73)
Join Date: Jan 2009
Location: Chicago
Posts: 1,731
Likes: 0
Received 0 Likes
on
0 Posts
Yes they are Rotors and Pads, this sale will last until I run out of inventory, I received a full skid of these rotors this week and am expecting another in the next few days so i am thinking it will be running for a month or so depending on how fast they move. You should be ok waiting for next month if you have to.
Trending Topics
04-10-2009, 03:26 PM
#11
FormerVendor
Thread Starter
iTrader: (73)
Join Date: Jan 2009
Location: Chicago
Posts: 1,731
Likes: 0
Received 0 Likes
on
0 Posts
They would be zinc coated blanks like these, I have drilled and slotted options available too however not in large enough stock to run a sale at this time. We do not carry hawk, however the Z16 pads are on the same level of performance as the hawk HPS.
04-10-2009, 10:11 PM
#12
Damn it, lol, earlier this week I couldn't find any brake specials so I've been piecing something together, I just spent too much money on a set of F&R Hawk pads, however I still need rotors. If willing would you PM me pricing for F&R rotors only. will be for a '01 Camaro
these breaks are going on a car that will do close to 130mph in the quarter mile, I understand a blank would give me better, more solid braking. is that true or should i look at one of your slotted rotors? I dont care about appearance, I just need it to stop lol
these breaks are going on a car that will do close to 130mph in the quarter mile, I understand a blank would give me better, more solid braking. is that true or should i look at one of your slotted rotors? I dont care about appearance, I just need it to stop lol
04-14-2009, 01:30 PM
#18
FormerVendor
Thread Starter
iTrader: (73)
Join Date: Jan 2009
Location: Chicago
Posts: 1,731
Likes: 0
Received 0 Likes
on
0 Posts
Yes if you mention LS1 tech you will get 10% off on the ebay store, make sure you mention LS1 tech in the notes to seller section in the check out. Please note that the rotors for sale on ebay are the Kinetic rotors with PowerStop pads, not the PowerStop Castings.
