Mr. B

iTrader: (1)

Does Wolfe sell a kit, or does it require fabrication to convert a 6 Point to a Full Cage?

Reason I ask:

For cars with t-tops running 10.99 and faster, will require full cage:

http://www.nhraonline.com/2003/news/october/102302.html

Angie

iTrader: (4)

Wolfe sells front-half kits for both mild steel ($275) and cromoly ($350.)

http://www.thunderracing.com/index.c...yid=1138#T1375

Angie

theblur98ss

iTrader: (71)

Angie...do you have any pics of just the kit or of it installed? It is weld in or bolt in?

Angie

iTrader: (4)

The front-half kits are weld in. You may be able to get an idea of what's included on this pic:

http://www.thunderracing.com/images/s63_large.jpg

Angie

NRC-Motorsports

hi hows it going ,any roll bar/cage manufacturer makes the conversion, any fabricator /or chassis shop like myself can bend the bars,on these f body cars ,the job comes out much better with runner bars not halo,s and it should come up through dash as it neater ,stronger[less bends around dash] and gives you more room,and most times the side bars have to be removed depending on the initial install[i.e. there location and length],besides most guys put in swing bars once they go to cage on these cars as most are street cars , hope this helps thnx bob