New Roller rockers for $285.99
#21
Originally Posted by Nasty N8
Shipping should be any day now.
1.7 is stock ratio and thats what they make them in. Why would you want to go down to 1.6 ratio?
As far as 98` I am not sure haven`t had a set mounted on one yet. They are much smaller than the Yella Terra`s so even if they don`t clear than it will be conciderably less clearancing to do. It is not too difficult to make the Yella`s fit so I see these being easy.
The regular retailis $330.99
Thanks Nate
1.7 is stock ratio and thats what they make them in. Why would you want to go down to 1.6 ratio?
As far as 98` I am not sure haven`t had a set mounted on one yet. They are much smaller than the Yella Terra`s so even if they don`t clear than it will be conciderably less clearancing to do. It is not too difficult to make the Yella`s fit so I see these being easy.
The regular retailis $330.99
Thanks Nate
I'd be interested to see some people actually running this.
#22
Thread Starter
FormerVendor
iTrader: (33)
Joined: Feb 2002
Posts: 5,052
Likes: 0
From: Lake in the Hills, IL
No they are very simple rockers and very slim. They fit on the head just as the stock ones do. They are very similar to the Yella terra`s but much smaller. No machining needed they clear the heads just fine. Well to see some people run this we would have to sell some first. I have bolted them to the heads and seen no clearance problems.
Nate
Nate
#32
Originally Posted by Nasty N8
No they are very simple rockers and very slim. They fit on the head just as the stock ones do. They are very similar to the Yella terra`s but much smaller. No machining needed they clear the heads just fine. Well to see some people run this we would have to sell some first. I have bolted them to the heads and seen no clearance problems.
Nate
Nate
I hope that fact remains true for the shaft mount version
#34
Hey all, on this issue of clearance of aftermarket rockers...
I talked to just about every vendor at SRI I could find and they all said you may have to do a bit of grinding. It has to do with core shift in the castings around the valve cover seat, so don't freak if even these need a little.
I talked to just about every vendor at SRI I could find and they all said you may have to do a bit of grinding. It has to do with core shift in the castings around the valve cover seat, so don't freak if even these need a little.
#35
Thread Starter
FormerVendor
iTrader: (33)
Joined: Feb 2002
Posts: 5,052
Likes: 0
From: Lake in the Hills, IL
They have 1.8`s too.
Yes the plan is to have a set of ajustable shaft style rockers as well soon.
Steve you are correct you can`t say all the castings are going to be exactly the same. And you mean PRI?
Nate
Yes the plan is to have a set of ajustable shaft style rockers as well soon.
Steve you are correct you can`t say all the castings are going to be exactly the same. And you mean PRI?
Nate
#36
Originally Posted by Nasty N8
They have 1.8`s too.
Yes the plan is to have a set of ajustable shaft style rockers as well soon.
Steve you are correct you can`t say all the castings are going to be exactly the same. And you mean PRI?
Nate
Yes the plan is to have a set of ajustable shaft style rockers as well soon.
Steve you are correct you can`t say all the castings are going to be exactly the same. And you mean PRI?
Nate
#39
Thread Starter
FormerVendor
iTrader: (33)
Joined: Feb 2002
Posts: 5,052
Likes: 0
From: Lake in the Hills, IL
I don`t know about clearance on bigger springs they are too new. But I am sure the company has adjusted for that. The reason others were having clearance issuses is not there fault it was the retainer manufactures measuing issues.
Nate
Nate