GM Truck Turbo Kit Special Spring Pricing
03-21-2005, 03:25 PM
#1
GM Truck Turbo Kit Special Spring Pricing Spring is almost here so we're running a discount on the Detroit Speedworks 4.8-6.0L Truck Turbo Kit.
Here is a video one of our customers supplied us after installing the kit on his Escalade EXT. The only modification is the turbo kit at 5 lbs. of boost. Everything else down to the exhaust is bone stock.
CLICK HERE
Look at the AWD Torque Steer!
This kit is complete and includes:
Dual 4 into 1 Tubular Headers w/ 1 5/8" primaries, 1/2" Laser Cut Header Flanges, 2 1/4" Cross Over, 3" Down Pipe, Powder Coated Inlet Tubes, All V-Band Connections, High Quality Silicone hoses w/ Aircraft Grade SS clamps, Tial 38mm Billet Wastegate, and complete detailed instructions.
* Bolt-on Installation; NO SHEETMETAL CUTTING OR WELDING required! Works with factory electronics.
The Battery, A/C, Power Steering, ABS, etc.. remain in the factory locations, so you could put your car back to stock, very easily at any time.
Pricing will be $4,995.00 for the kit. We recommend a shift kit which would add an additional $300 to the cost of the kit.
The turbo is a GT-37 with a custom exhaust housing, however upgrades are available.
We've seen decent gains with the kit on the Escalade at only 5 lbs. Stock it ran 16.8 @ 80 mph and with 24 inch wheels and a lot of heavy stereo equipment it ran 14.2 @ 94 mph.
Below you will find photos of the kit installed on a 2003 Cadillac Escalade
Click here to see the truck in action. Note: This is at 5 lbs. of boost.
Click Here
Thank you
Regards,
Rick LeBlanc
Livernois Motorsports
Here is a video one of our customers supplied us after installing the kit on his Escalade EXT. The only modification is the turbo kit at 5 lbs. of boost. Everything else down to the exhaust is bone stock.
CLICK HERE
Look at the AWD Torque Steer!
This kit is complete and includes:
- Polished Garrett Turbo
- Black Powder Coated Inlet Tubes
- Black Satin Ceramic Coating on Hot Parts
- 42 lb Injectors
- 3 Core Air-to-Air Intercooler
Dual 4 into 1 Tubular Headers w/ 1 5/8" primaries, 1/2" Laser Cut Header Flanges, 2 1/4" Cross Over, 3" Down Pipe, Powder Coated Inlet Tubes, All V-Band Connections, High Quality Silicone hoses w/ Aircraft Grade SS clamps, Tial 38mm Billet Wastegate, and complete detailed instructions.
* Bolt-on Installation; NO SHEETMETAL CUTTING OR WELDING required! Works with factory electronics.
The Battery, A/C, Power Steering, ABS, etc.. remain in the factory locations, so you could put your car back to stock, very easily at any time.
Pricing will be $4,995.00 for the kit. We recommend a shift kit which would add an additional $300 to the cost of the kit.
The turbo is a GT-37 with a custom exhaust housing, however upgrades are available.
We've seen decent gains with the kit on the Escalade at only 5 lbs. Stock it ran 16.8 @ 80 mph and with 24 inch wheels and a lot of heavy stereo equipment it ran 14.2 @ 94 mph.
Below you will find photos of the kit installed on a 2003 Cadillac Escalade
Click here to see the truck in action. Note: This is at 5 lbs. of boost.
Click Here
Thank you
Regards,
Rick LeBlanc
Livernois Motorsports
03-22-2005, 10:12 AM
#4
Originally Posted by V-10 Killer
Damn, I don't even have a truck yet, but now I want one just so I can bolt that to it!
-Rick
03-22-2005, 09:31 PM
#6
Staging Lane
Join Date: Oct 2004
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
Rick LeBlanc,
This kit is complete and includes:
[*]Polished Garrett Turbo[*]Black Powder Coated Inlet Tubes[*]Black Satin Ceramic Coating on Hot Parts[*]42 lb Injectors[*]3 Core Air-to-Air Intercooler
Dual 4 into 1 Tubular Headers w/ 1 5/8" primaries, 1/2" Laser Cut Header Flanges, 2 1/4" Cross Over, 3" Down Pipe, Powder Coated Inlet Tubes, All V-Band Connections, High Quality Silicone hoses w/ Aircraft Grade SS clamps, Tial 38mm Billet Wastegate, and complete detailed instructions.
-----All of the above is included in the original kit for $4995.99 correct?
-----Would this fit an '04 GMC VHO (LQ9 6.0 HO), engine almost the same as the EXT and Caddy.
-----Do you have any authorized dealer/installers in the Dallas,Tx area?
-----Can you upgrade to a GT-67 turbo? How much extra would it be?
I was seriously looking at getting an STS, but not to sure about the rear mount style.
Thank you for any information,
Caylon
This kit is complete and includes:
[*]Polished Garrett Turbo[*]Black Powder Coated Inlet Tubes[*]Black Satin Ceramic Coating on Hot Parts[*]42 lb Injectors[*]3 Core Air-to-Air Intercooler
Dual 4 into 1 Tubular Headers w/ 1 5/8" primaries, 1/2" Laser Cut Header Flanges, 2 1/4" Cross Over, 3" Down Pipe, Powder Coated Inlet Tubes, All V-Band Connections, High Quality Silicone hoses w/ Aircraft Grade SS clamps, Tial 38mm Billet Wastegate, and complete detailed instructions.
-----All of the above is included in the original kit for $4995.99 correct?
-----Would this fit an '04 GMC VHO (LQ9 6.0 HO), engine almost the same as the EXT and Caddy.
-----Do you have any authorized dealer/installers in the Dallas,Tx area?
-----Can you upgrade to a GT-67 turbo? How much extra would it be?
I was seriously looking at getting an STS, but not to sure about the rear mount style.
Thank you for any information,
Caylon
03-23-2005, 07:39 AM
#7
Originally Posted by Crazy
-----All of the above is included in the original kit for $4995.99 correct?
-----Would this fit an '04 GMC VHO (LQ9 6.0 HO), engine almost the same as the EXT and Caddy.
-----Do you have any authorized dealer/installers in the Dallas,Tx area?
-----Can you upgrade to a GT-67 turbo? How much extra would it be?
I was seriously looking at getting an STS, but not to sure about the rear mount style.
Caylon
You are correct, everything mentioned is included in the kit for $4,995.00. This kit fits any 4.8, 5.3, or 6.0L Sierra, Denali, or Escalade.
The only thing not included with the kit that we do recommend is a shift kit to save the trans. This sells for $300.
We don't have an authorized dealer/installer in Texas, however the installation is straight forward and has pretty good instructions so any performance shop should be able to install the kit for you.
A GT-67 would require a different flange, however for example you could use a GT-40/67 and it would be a about a $500 upgrade.
Thank you for your interest
Regards,
Rick LeBlanc
Livernois Motorsports
Trending Topics
08-11-2005, 02:48 PM
#10
Originally Posted by ajwz28
is it easy to connect the turbo kit to the 2500hd exhaust
Mike, we don't have a turbo kit for the 8.1, but there are some S/C kits out there for them. You can call our sales guys at 313-561-5500 for more info and pricing.
Thank you
-Rick
